[Benjamin]

I used the DIY kit from LMC, glass packs and side exit. It bolted-up to my factory ram horn manifolds.

It has the bends to clear the axle and everything.

One hiccup though, if I pass the passenger side pipe above the transfer case drop (mine's an NP205) it would come really close to the fuel line where it exits the cab, so I got a few extra bends from auto zone to drop it under the t-case. not sure if a rockwell would have a similar issue.

So, overall, it's not perfect, could be better, but I have about 5 years and 10,000 miles with no problems.