Quote:
Originally Posted by dsraven
rabid,
take care if you plan to move the axle because the front of the rear axle spring mounts would than possibly be an issue. better to grind off the weld that connects the front and rear frame sections and move accordingly. one part slides inside the other part. measure carefully, support the frame to eliminate sag, have your welder put it back together. check the site, several guys do it that way on here. just ensure the blazer frame is the same in that area.
or cut the box to match your wheelbase on the new frame
your truck.....
|
Thank for the advice. Gonna start with the cab and go from there. Just need to see what looks good. Ideally want to keep everything on the frame as is. I'm going to start a build thread here soon.