|
Re: Help - Converted to Front and Rear Disc, now what size for hard lines
I have no idea what the kit you may have for the rear end, but the 5 lug rear end in my Burban has 1/4" to the flex hose to the axle then the lines on the axle are 3/16". The fitting on the axle end of the flex hose is set up for 1/4" fittings so you have to use a 1/4" inverted flare to 3/16" tube fitting. The wheel cylinders are set up for 3/16" fittings. There is more information on flex hoses and fittings on page 8 of my WMB thread below.
Good luck.
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. 
RIP Bob Parks.
1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo
If it breaks I didn't want it in the first place
The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377
|