|
Re: Master Cylinder how bad does this look? w/ pics
Quote:
Originally Posted by AussieinNC
IMHO...that master cylinder needs to be swapped out ASAP....the top seal is being sucked down by internal pressure bypassing inside the old cylinder...
New units are available for around $50...
The brake pipes also look sketchy...lots of rust...should be swapped out ....
Pull some wheels off and the drums / calipers...check for leaks...
Biggest issue when it gets to this stage are the rubber hoses between chassis points to each wheel and chassis to rear axle...they swell internally and can either balloon or develop internal issues that prevent full release...
GOLDEN RULE ....never shortcut on Brake Systems
|
The top seal sinks into the master reservoirs when the fluid disappears, right? Such as into the calipers to take of the wear volume of the pads.
__________________
~Steven
'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper
Simi Valley, CA
|