The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1970 c10 distributor upgrade recommendations

Andy4639 · 10-21-2018, 09:36 AM

Just go to any junkyard and pull a HEI off any small block GM product and install it. It's that simple. When I did my TPI motor I pulled one out cleaned it up and reinstalled in my 305 TPI. 325,000 miles later when I sold it, it was still working with only one module swap.

10-21-2018, 09:36 AM	#41
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 1970 c10 distributor upgrade recommendations Just go to any junkyard and pull a HEI off any small block GM product and install it. It's that simple. When I did my TPI motor I pulled one out cleaned it up and reinstalled in my 305 TPI. 325,000 miles later when I sold it, it was still working with only one module swap. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.