Quote:
Originally Posted by Trash
I’m by no means an expert on this, Do you have the height of the floor pan correct?
I noticed on my 67 the a and b pillar bolt holes didn’t line up with the new pan. I’m sure about this because I had everything braced to the original. You might want to check this.
Keep in mind that everything connects together. Trial fit everything before welding anything tight. I wouldn’t buy another door right now, just use what you have to get things lined up.
|
As far as floor pan height - I have no clue. It 'looks' proper. I put the top of the floor in to the original line that was left on the inside of the back of the cab from removing the old one and leveled it out on that line, so at the very least, the top of the floor is at the same point and as level as the original floor.
My B pillar holes wouldn't line up anyhow as I had to cut the old ones off and the replacements did not have any holes!