|
Re: Header fitment advice
I used Hedman 68198 and had to use a tubular trans crossmember and I built a custom shift linkage with spherical rod ends and an aluminum tube I bought from Speedway Motors, along with a modified stock TH400 linkage bracket at the trans. I also drilled holes in the trailing arm crossmember to tuck the exhaust between the rails. No issues with fitment of headers with starter or control arms.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast"
200,000 Mile Club
Disc Brake Club
Owner installed options:
Front Sway Bar
Power Steering
Power Brakes
Cigar Lighter
Courtesy Lights
Deluxe Side Markers
Wiper Delay
Sliding Rear Window
Power Windows
Power Locks
Sniper EFI
2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear
|