The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Jcfcamaro** · 12-18-2019, 02:29 AM

I have a real nice 10in flywheel which I believe they call it a 10.5. A few years ago I was building a new motor and took all my parts to the machine shop and got the 10.5 mixed up with the 11in one I was planning on using. Didn't figure it out until he had already surface ground and balance it. It's been sitting ever since. I'd make you a good deal on it but its heavy for shipping. Also look for a casting number 403 bell housing there pretty cheap and see them all the time for sale .

12-18-2019, 02:29 AM	#14
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Flywheel size vs Bellhousing I have a real nice 10in flywheel which I believe they call it a 10.5. A few years ago I was building a new motor and took all my parts to the machine shop and got the 10.5 mixed up with the 11in one I was planning on using. Didn't figure it out until he had already surface ground and balance it. It's been sitting ever since. I'd make you a good deal on it but its heavy for shipping. Also look for a casting number 403 bell housing there pretty cheap and see them all the time for sale .