The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 12-20-2019, 11:10 PM

I like fixing things also if possible. I just reinstalled my 68 fuse block after a good cleaning. I added the longer wiper wires to move the switch over to the passenger side of the cluster and added a NSS wiring, HEI and relays on the head lights. That should help on the wiring to last another 50 years I hope take the amp load off the whole system.

12-20-2019, 11:10 PM	#17
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Fuse panel I like fixing things also if possible. I just reinstalled my 68 fuse block after a good cleaning. I added the longer wiper wires to move the switch over to the passenger side of the cluster and added a NSS wiring, HEI and relays on the head lights. That should help on the wiring to last another 50 years I hope take the amp load off the whole system. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.