Quote:
Originally Posted by 3767
Put a jack under that ball joint. With pressure the spinning should stop. Use your old castle nut. Sounds like someone put the wrong 1 n the box. Main thing is you should have to apply some pressure to get ball joint thru spindle. That impact gun will help speed things up. Keep everyone posted as u go. We have all had some problems at some point with rebuilding the front end. I replaced mine with the motor out and that Jack under the ball joint helped.
|
I will try putting a jack under the ball joint.
The same castle nut was in both new ball joints. I was able to thread the old castle nut on the ball joint by hand but it quickly became really tight.
My engine is still in.