The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

REDROCKER652002 · 03-18-2020, 08:26 PM

Thanks to all who replied. If I have a ground issue would I still be getting power to the plug that plugs into the circuit board on the dash? Not try to be a wise guy, but the blinker and dash light wires are getting power to the plug. Now, the screws to the circuit board I never thought of. Those are all the original screws with a new board. I will check that too.

Thanks to LocDoc, I got the holders. My hope is with all the suggestions and the parts I can figure this thing out. More to be posted later. RR

03-18-2020, 08:26 PM	#14
REDROCKER652002 Registered User Join Date: Nov 2018 Location: South San Francisco CA, Posts: 441	Re: Dash issue Thanks to all who replied. If I have a ground issue would I still be getting power to the plug that plugs into the circuit board on the dash? Not try to be a wise guy, but the blinker and dash light wires are getting power to the plug. Now, the screws to the circuit board I never thought of. Those are all the original screws with a new board. I will check that too. Thanks to LocDoc, I got the holders. My hope is with all the suggestions and the parts I can figure this thing out. More to be posted later. RR