|
Re: Brothers 4/6 Drop and Disc Brake Conversion Quality
I just did the POL kit, front and rear disk with master and booster, inner/outer tie rods adjusting sleeves , all front brake lines and western chassis 2.5 drop spindles. i am really happy so far. got it off ebay. my only complaint is the front brake lines were kinda hard to figure out with no diagram.
it was way cheaper then off there site. i did get the cpp drop kit and im bummed. the rear is actually an inch lower then the front. but summit has the cpp stuff on the shelf and can buy the springs and shock relocation brackets and panhard bar as a kit plus free shipping.
just wanted t throw my .02 in. good luck
|