The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Smitty** · 06-19-2020, 11:14 PM

I used a pump from a mid 90's GMC. which is the vehicle i pulled all the brackets for the serpentine set up off of. Replaced my leaky, worn box with one from Redhead Steering Boxes. My drag link was shot so that was also changed at that time. You will need an adapter for the pressure port on the pump to take you from the o-ring fitting to the inverted flare needed for the OEM pressure hose. They are available at Jegs, Summit probably has them as well.

06-19-2020, 11:14 PM	#4
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,137	Re: Power steering, what parts do I need? I used a pump from a mid 90's GMC. which is the vehicle i pulled all the brackets for the serpentine set up off of. Replaced my leaky, worn box with one from Redhead Steering Boxes. My drag link was shot so that was also changed at that time. You will need an adapter for the pressure port on the pump to take you from the o-ring fitting to the inverted flare needed for the OEM pressure hose. They are available at Jegs, Summit probably has them as well. __________________ Smitty '71 Short Fleetside Spring Valley, Ca.