Quote:
Originally Posted by dmjlambert
The problem may be that vertically mounted resistor on the back of the temp gauge. Seventy Two ohm'd it and found it has no reading. I don't know what the reading those blue ones are supposed to have. My factory gauge has a wire-wound-on-white-cardboard resistor that reads 75 ohms. I'm pretty confident that if the resistor is required for the gauge, it should have some resistance.
|
I agree, and Terry also suggests it may be in the gauge cluster, so why not the resistor as it seems way off from other reading that have been indicated in the forum.
Since I have the entire gauge cluster out of the truck i will pull the resistor and head down to radio shack and see if I can pick up a 60 and 90 ohm resistor to try out. Any other suggestions while I am there?