[maynardogle]

My truck has 68 cab on 71 frame. I ‘m guessing the weld in the steering shaft I just discovered is some kind of work-around to make the 68 steering column work with the 71 steering box. The shaft has never had the spring and washer, was super loose, and when I took it apart I found the lower bearing pieces and little balls buried in the grease. It wasn’t till I cleaned it up that I discovered the weld in the shaft, and the little collar that is pressed on the shaft that maybe was supposed to have O rings? I have it all back together now, with a new bearing, spring and washer, and I will put the steering wheel back on next, but I am wondering about the welded shaft and the little collar on the shaft. Any feedback appreciated.