Ditto on the gasket.....I like a good cork gasket..... just smear a little axle bearing grease on both sides of the gasket & stick it to the pan. A little rtv wont hurt anything , if you like that route better.....just stay away from the "sticky sealers" that can be dissolved by hot ATF(they will cause problems). Best of luck,crazyL 
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
|