Quote:
Originally Posted by Andy4639
Disconnect the rear connector and put a test light in each terminal and go through the signals and brakes and lights to see if you get anything on each wire. The brakes and turn signals are the same wires. The schematic is color coded for all the light for both sides.
Drivers side lights:
Brown: is parking, tail lights, side marker and tag light.
Light Green: is drivers side backup light.
Yellow: Drivers side brake & turn signal
Passenger side lights:
Brown: is parking, tail lights, side marker and tag light.
Light Green: is passenger side backup light.
Dark Green: Passenger side brake & turn signal
|
Awesome, thanks. I probably will not get back on it til the weekend again but I an sure going to try to look at it sooner if I can get away.