The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**pjmoreland** · 11-04-2021, 12:47 AM

I relocated the lines to the front of the crossmember on my '68, described here:

https://67-72chevytrucks.com/vboard/...d.php?t=823192

lolife99 commented on that thread that he has done a couple of disc brake conversions where he used the stock brake line mounting locations and had no problem. You might contact him and see how he did it. I think one factor might be the type of rims and tires you use. If you have big rims with low profile tires, I believe there will be more room for rear routed hoses to bulge outward when the rear of the tire turns in in the back

11-04-2021, 12:47 AM	#9
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,237	Re: Bagged 67c10 front brake hose? I relocated the lines to the front of the crossmember on my '68, described here: https://67-72chevytrucks.com/vboard/...d.php?t=823192 lolife99 commented on that thread that he has done a couple of disc brake conversions where he used the stock brake line mounting locations and had no problem. You might contact him and see how he did it. I think one factor might be the type of rims and tires you use. If you have big rims with low profile tires, I believe there will be more room for rear routed hoses to bulge outward when the rear of the tire turns in in the back Last edited by pjmoreland; 11-04-2021 at 12:53 AM.