[Rich72C10]

Originally Posted by Thealien

I had asked what people are using for washer bottle/jar/tank mounted pump and did not get a lot of replies or answers. I tried one of the non tank mounted pumps and it was noisy and leaked.

I had purchased a push into a rubber grommet type and was not impressed. Installing it into a reproduction tank (thinner than OEM) looked hack with the amount of silicone caulking/sealant I ended up using. I bought an OEM used tank and a couple of NOS (in case I wanted to return to original)

I also purchased an AC Delco pump that screwed into a tank mounted grommet but did not come with a nut or filter. Member Greasy Harley informed me the Anco 63-01 pump comes with the filter nut.

Here is what I ended up with and I believe it will work (not tested, too cold and I painted the bracket).



And here is looking inside you can see the filter nut.

I like this idea. I have some reservoir with pump and it works well but it really doesn't set on the supplied bracket very well. I actually have the reservoir tie wrapped to the bracket - which it still slides off a bit and is always cockeyed - which annoys me to no end.

Looks like a nice mod, which I still have the original reservoir / bracket in my attic. I'll have to give this some thought - thank you for posting this.

Anco 63-01 Windshield Washer Pump
Amazon $25 bucks but 43 with shipping (not Prime).

VINTAGE Anco DODGE PLYMOUTH Windshield Washer Pump with WHITE PUMP HEAD!
Ebay $25 shipping included. I think this one looks closer to Thealien example?