View Single Post
Old 08-06-2023, 09:07 AM   #5
Pontiac1976
Registered User
 
Pontiac1976's Avatar
 
Join Date: Oct 2015
Location: Ottawa, Ontario, Canada
Posts: 780
Re: screen for rear slider window.anyone done it ?

I would use this https://www.amazon.ca/Fastener-Adhes...1zcF9hdGY&th=1 put the wiry side on the glass/alum frame side that does not move make sure to clean and dry in stall on a warm day. Get your screen of your choice sew the meshy side to the screen make two seams stretch tight press in to place. I all was put the wiry side on 1-2 day let it sit first before putting screen side on make sure you put the screen on a cooler day in the shade help is a blessing make sure you get it right some time it will pull wiry off the alum frame/Glass. with a little heat on hot day, it can be pulled off with a little work clean easy without a lot of work and you would never know it was on thereafter. I hope this help you.
__________________
1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
Pontiac1976 is offline   Reply With Quote