|
Yep Andy you've got it..... They spot welded the dash at the bottom of the windshield opening ... and it's covered with the windshield rubber.. You will either have to remove the windshield and drill the spot welds out, or you can cut the dash right along the openings under the dash pad.. either way you'll have some welding to do.. There is a Special Drill bit that drills a small hole through one piece of sheet metal, and a larger one through the other.. So in otherwords... It will drill a small hole through the side you want to retain, and a larger hole in the dash part that will be discarded.. Then you can spot weld it back in the same spots it was.... ( I forgot the name of the Bit )) I can check mine tomorrow, Or, there should be someone here that remembers the name... They cost about $12.00 and Up...
|