WTB Compression rings, 307 engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 10-16-2004, 08:10 PM

I need two compression rings for a standard bore 307 engine, (I broke two).

Anyone have a couple that they could sell?

Jim

JimKshortstep4x4 · 10-17-2004, 08:07 PM

Used compression rings from a 307 will work, also.

Jim

**Warrens69GMC** · 10-17-2004, 11:51 PM

Evil bay has them (set) for 20.00.

JimKshortstep4x4 · 10-18-2004, 09:17 AM

Warrens69gmc,

I will check it out,

Thanks!

Jim

JimKshortstep4x4 · 10-18-2004, 12:35 PM

Warrens69gmc,

I am having trouble finding rings for the 307 engines. 305's are available but not 307.

Do you have a link?

Jim

JimKshortstep4x4 · 10-19-2004, 08:04 PM

Anyone?

Jim

GROUCH · 10-19-2004, 09:33 PM

NORTHERN AUTO PART HAD THEM ABOUT A YEAR AGO, I FOUND THEM AT www.naparts.com

**JDL** · 10-19-2004, 11:11 PM

I Have a full set.

**Warrens69GMC** · 10-20-2004, 12:06 AM

JimKshortstep4x4 · 10-20-2004, 06:32 AM

Warrens69gmc,

Thanks for the link.

JDL,

What do you want for the full set?

Jim

10-16-2004, 08:10 PM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	WTB Compression rings, 307 engine I need two compression rings for a standard bore 307 engine, (I broke two). Anyone have a couple that they could sell? Jim

10-17-2004, 11:51 PM	#3
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,626	evil bay has em- Evil bay has them (set) for 20.00. __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

10-19-2004, 09:33 PM	#7
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	307 Rings NORTHERN AUTO PART HAD THEM ABOUT A YEAR AGO, I FOUND THEM AT www.naparts.com

10-19-2004, 11:11 PM	#8
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,884	I Have a full set. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

10-20-2004, 12:06 AM	#9
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,626	here- little more- http://cgi.ebay.com/ebaymotors/ws/eB...category=33623 or: http://cgi.ebay.com/ebaymotors/ws/eB...category=33623 or: http://cgi.ebay.com/ebaymotors/ws/eB...category=33623 hth warrens69gmc __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

10-17-2004, 08:07 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Used compression rings from a 307 will work, also. Jim

10-18-2004, 09:17 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Warrens69gmc, I will check it out, Thanks! Jim

10-18-2004, 12:35 PM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Warrens69gmc, I am having trouble finding rings for the 307 engines. 305's are available but not 307. Do you have a link? Jim

10-19-2004, 08:04 PM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Anyone? Jim

10-20-2004, 06:32 AM	#10
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Warrens69gmc, Thanks for the link. JDL, What do you want for the full set? Jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.