WTB: Power Steering Pump & Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prathbun · 02-22-2008, 08:14 AM

I would like to buy a power steering pump and brackets along with the correct bolts for a 67 C20 283. Pictured below are the type of alternator brackets and the motor I have. The power steering pump and brackets pictured will not fit and are for a long water pump (I think) Thanks for the help.

PICKMUP · 02-22-2008, 10:19 AM

Any of our 67-72 PS sys should work for you (there are three or four different ones). Just be sure you get the "matching" components from the same truck: pump & pulley, brackets, and crank PS drive pulley. If you mix them up...they won't line up.

billsbowtie · 02-23-2008, 01:06 AM

i have some i will have to look them up.

Prathbun · 02-23-2008, 01:59 AM

I think this is the type of bracket I need but I can't be sure. If the leg to the motor mount is about 4-6" long then I think it work.

So, does anyone have a power steering pump and bracket that match this configuration?? I would also like all the bolts and matching lower pulley if it's available.

Thanks for everyones help!! Hopefully we can help others by these postings.

mkundo · 02-23-2008, 03:33 AM

Would you be interested in selling the P/S brackets that you feel you don't need?
Thanks

Prathbun · 02-23-2008, 05:07 AM

Quote:

Originally Posted by mkundo

Would you be interested in selling the P/S brackets that you feel you don't need?
Thanks

Yes, I would be interested in selling the brackets listed above. However, I'm working on a trade deal right now but if that doesn't work out then the brackets are yours.

billsbowtie · 02-23-2008, 08:46 AM

here is the one i have if you are still looking $45.00 shipped to you.

mkundo · 02-23-2008, 09:20 AM

Thanks, I have the pump (hydro-boost). I would need the brackets only.

Dan

Prathbun · 02-26-2008, 05:41 PM

Quote:

Originally Posted by billsbowtie

here is the one i have if you are still looking $45.00 shipped to you.

I will take the PS pump and bracket shipped for $45. Let me know where I can pay pal you. Thanks!!!

PICKMUP · 02-23-2008, 09:33 AM

Hydro-vac was on a LWP, brackets are from SWP, crank pullies are???. You may still be doing some searching to make all this line up. It is a nice system when you get it all working.

mkundo · 02-24-2008, 05:24 AM

Pickmup, Thanks for the information. Would you have any photos of what I may need?
Thanks,Dan

Prathbun · 02-25-2008, 11:20 PM

ttt

mkundo · 02-26-2008, 12:46 AM

Ttt

rawraw67 · 02-26-2008, 09:32 AM

billsbowtie I will take the pump and brackets if Prathbun or mkundo pass on it.

what is the Hydro vac

billsbowtie · 02-26-2008, 08:25 PM

pm sent

Prathbun · 02-27-2008, 05:56 PM

Quote:

Originally Posted by billsbowtie

pm sent

Bill,

I take the PS pump. Pay Pal sent. Thanks for all the help !!!!

02-22-2008, 08:14 AM	#1
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	WTB: Power Steering Pump & Bracket I would like to buy a power steering pump and brackets along with the correct bolts for a 67 C20 283. Pictured below are the type of alternator brackets and the motor I have. The power steering pump and brackets pictured will not fit and are for a long water pump (I think) Thanks for the help. Attached Images __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

02-22-2008, 10:19 AM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: WTB: Power Steering Pump & Bracket Any of our 67-72 PS sys should work for you (there are three or four different ones). Just be sure you get the "matching" components from the same truck: pump & pulley, brackets, and crank PS drive pulley. If you mix them up...they won't line up.

02-23-2008, 01:06 AM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Power Steering Pump & Bracket i have some i will have to look them up. __________________ i have 67/72 chevy truck parts f/s.

02-23-2008, 01:59 AM	#4
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: WTB: Power Steering Pump & Bracket I think this is the type of bracket I need but I can't be sure. If the leg to the motor mount is about 4-6" long then I think it work. So, does anyone have a power steering pump and bracket that match this configuration?? I would also like all the bolts and matching lower pulley if it's available. Thanks for everyones help!! Hopefully we can help others by these postings. Attached Images __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

02-23-2008, 03:33 AM	#5
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: WTB: Power Steering Pump & Bracket Would you be interested in selling the P/S brackets that you feel you don't need? Thanks __________________ Dan

02-23-2008, 08:46 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Power Steering Pump & Bracket here is the one i have if you are still looking $45.00 shipped to you. __________________ i have 67/72 chevy truck parts f/s.

02-23-2008, 09:20 AM	#8
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: WTB: Power Steering Pump & Bracket Thanks, I have the pump (hydro-boost). I would need the brackets only. Dan __________________ Dan

02-23-2008, 09:33 AM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: WTB: Power Steering Pump & Bracket Hydro-vac was on a LWP, brackets are from SWP, crank pullies are???. You may still be doing some searching to make all this line up. It is a nice system when you get it all working.

02-24-2008, 05:24 AM	#11
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: WTB: Power Steering Pump & Bracket Pickmup, Thanks for the information. Would you have any photos of what I may need? Thanks,Dan __________________ Dan

02-25-2008, 11:20 PM	#12
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: WTB: Power Steering Pump & Bracket ttt __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

02-26-2008, 12:46 AM	#13
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: WTB: Power Steering Pump & Bracket Ttt __________________ Dan

02-26-2008, 09:32 AM	#14
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 485	Re: WTB: Power Steering Pump & Bracket billsbowtie I will take the pump and brackets if Prathbun or mkundo pass on it. what is the Hydro vac Last edited by rawraw67; 02-26-2008 at 09:33 AM.

02-26-2008, 08:25 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Power Steering Pump & Bracket pm sent __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.