transfer case knob id required - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 02-03-2011, 10:26 AM

anyone know what this is from?

msgross · 02-03-2011, 10:29 AM

i'm thinking Ford...

**special-K** · 02-03-2011, 10:33 AM

Whatever it is,it isn't a 2spd case...no Low.So,it's not a truck. I refer to that system as all wheel drive,like what's in cars and light SUVs.

sdailey · 02-03-2011, 10:46 AM

Where did you find that pic? I'll say Ford as well only because I saw one listed on ebay recently for sale and it was listed for a Ford 67-72 truck.

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

**Stocker** · 02-03-2011, 11:41 AM

I'm thinking Ford also. A friend of mine once had a full size half-ton 4x4 Ford with a single-speed t-case and manual trans with granny low gear.

Redcap · 02-03-2011, 01:52 PM

I know that both International Harvesters and Fords could be had with a single-speed transfer case. Not sure about Dodge.

msgross · 02-03-2011, 08:08 PM

Quote:

Originally Posted by sdailey

Where did you find that pic? I'll say Ford as well only because I saw one listed on ebay recently for sale and it was listed for a Ford 67-72 truck.

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

I bought it for $6 since I thought it was cool looking...

Altec · 02-03-2011, 09:33 PM

Not a Furd guy, but I believe that shift knob is for a Dana 21 transfer case. simple 1:1 part time case.

msgross · 02-04-2011, 09:58 AM

thanks...

**special-K** · 02-05-2011, 07:15 AM

Wow,I learned something here. I never knew Ford and even International made wimpy 4wds.

Seriously,in the "real 4wd" world you ain't nuthin unless you got low transfer.

Blazer1970 · 02-05-2011, 08:51 AM

Quote:

Originally Posted by special-K

Wow,I learned something here. I never knew Ford and even International made wimpy 4wds.

Seriously,in the "real 4wd" world you ain't nuthin unless you got low transfer.

Maybe, but I would venture that 90% of the 4WD trucks on the road never get shifted into low range by their original owner.

**Stocker** · 02-05-2011, 11:26 AM

Quote:

Originally Posted by special-K

Seriously,in the "real 4wd" world you ain't nuthin unless you got low transfer.

I hear you, Tim -- but the guy I mentioned above (early-seventies Ford 4x4, single-speed t-case and granny-low trans) was able to put his truck through some pretty tough real-world situations. Never could have done it without that crawler low gear, though....

02-03-2011, 10:26 AM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	transfer case knob id required anyone know what this is from? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-03-2011, 10:29 AM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: transfer case knob id required i'm thinking Ford... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-03-2011, 10:33 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: transfer case knob id required Whatever it is,it isn't a 2spd case...no Low.So,it's not a truck. I refer to that system as all wheel drive,like what's in cars and light SUVs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-03-2011 at 10:34 AM.

02-03-2011, 10:46 AM	#4
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: transfer case knob id required Where did you find that pic? I'll say Ford as well only because I saw one listed on ebay recently for sale and it was listed for a Ford 67-72 truck. http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories __________________ Shannon Last edited by sdailey; 02-03-2011 at 10:49 AM.

02-03-2011, 11:41 AM	#5
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,809	Re: transfer case knob id required I'm thinking Ford also. A friend of mine once had a full size half-ton 4x4 Ford with a single-speed t-case and manual trans with granny low gear. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

02-03-2011, 01:52 PM	#6
Redcap Registered User Join Date: May 2010 Location: Lewis County, WA Posts: 1,523	Re: transfer case knob id required I know that both International Harvesters and Fords could be had with a single-speed transfer case. Not sure about Dodge.

02-03-2011, 09:33 PM	#8
Altec Getcha Pull Join Date: Nov 2010 Location: MD Posts: 691	Re: transfer case knob id required Not a Furd guy, but I believe that shift knob is for a Dana 21 transfer case. simple 1:1 part time case. __________________ '81 K10 454/SM465 '86 S10 Blazer '95 H-D Softail '96 Integra

02-04-2011, 09:58 AM	#9
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: transfer case knob id required thanks... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-05-2011, 07:15 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: transfer case knob id required Wow,I learned something here. I never knew Ford and even International made wimpy 4wds. Seriously,in the "real 4wd" world you ain't nuthin unless you got low transfer. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.