14 Bolt full floater 3.21 ring and pinion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 12-05-2013, 10:51 AM

Anybody know what a new set of 3.21 ratio ring and pinion for a full floater 14 bolt is worth these days? I hear they are very rare to find?

Thanks.

**kwmech** · 12-05-2013, 01:17 PM

Brand new set? about 3-400, used 200

If you've got a 4wd and looking to match the gears, the only thing you will find is a Dodge ratio in a dana44. Those are hard to find also. Makes a nice ratio for a diesel though

*72longbed* · 12-05-2013, 01:21 PM

But do you know where to find a set for the 14 Bolt? 3.21?

c20pickup · 12-06-2013, 03:26 PM

give randys ring and pinion a shot, seems like a pretty good source, heard the name pop up on multiple occasions.

*72longbed* · 12-06-2013, 04:58 PM

KW,
do you know if its Ok to mix 3.21 in the rear with 3.23 up front? Are they close enough to not cause a problem?

Thanks.

**kwmech** · 12-06-2013, 05:14 PM

That close , no problem. I've built diffs for the toyota crowd that uses a toyota 5.29s in the rear and I the closest I can match with the Dana 44 front is 5.38

c20pickup · 12-06-2013, 06:20 PM

Quote:

Originally Posted by kwmech

That close , no problem. I've built diffs for the toyota crowd that uses a toyota 5.29s in the rear and I the closest I can match with the Dana 44 front is 5.38

Yeah, the .02 difference between 3.21 to 3.23 wont make a dofference

airdale94 · 12-08-2013, 12:34 AM

The only thing you'll find new is 3.42. EastCoastGear has OE for $330. Or if you call them they have aftermarket for 2 something.

http://eastcoastgearsupply.com/i-120...n-3-42-oe.html

12-05-2013, 10:51 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	14 Bolt full floater 3.21 ring and pinion Anybody know what a new set of 3.21 ratio ring and pinion for a full floater 14 bolt is worth these days? I hear they are very rare to find? Thanks.

12-05-2013, 01:17 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,718	Re: 14 Bolt full floater 3.21 ring and pinion Brand new set? about 3-400, used 200 If you've got a 4wd and looking to match the gears, the only thing you will find is a Dodge ratio in a dana44. Those are hard to find also. Makes a nice ratio for a diesel though

12-05-2013, 01:21 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: 14 Bolt full floater 3.21 ring and pinion But do you know where to find a set for the 14 Bolt? 3.21?

12-06-2013, 03:26 PM	#4
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: 14 Bolt full floater 3.21 ring and pinion give randys ring and pinion a shot, seems like a pretty good source, heard the name pop up on multiple occasions.

12-06-2013, 04:58 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: 14 Bolt full floater 3.21 ring and pinion KW, do you know if its Ok to mix 3.21 in the rear with 3.23 up front? Are they close enough to not cause a problem? Thanks.

12-06-2013, 05:14 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,718	Re: 14 Bolt full floater 3.21 ring and pinion That close , no problem. I've built diffs for the toyota crowd that uses a toyota 5.29s in the rear and I the closest I can match with the Dana 44 front is 5.38

12-08-2013, 12:34 AM	#8
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: 14 Bolt full floater 3.21 ring and pinion The only thing you'll find new is 3.42. EastCoastGear has OE for $330. Or if you call them they have aftermarket for 2 something. http://eastcoastgearsupply.com/i-120...n-3-42-oe.html __________________ 68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.