NV4500/205 combo - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 01-25-2006, 12:43 AM

I have a new rebuilt NV4500 that I bought recently and have decided not to use. It's a 99' version with hydrolic bellhousing.It includes the bellhousing and shifter. I have it bolted to a very nice 88' NP205 using an AA adapter. The 205 has been disassembled and cleaned.I repainted it and resealed it. I would take $1700 for just the NV4500 or $2250 for the whole deal.I want to use it but have no need for it at this time

.

68gmcdually · 01-25-2006, 06:50 PM

I didn't realize that a NV4500 pulled in that much money. That is amazing, I guess that I will be rebuilding mine instead of replacing. Good luck on the sale of yours.

**special-K** · 01-25-2006, 10:11 PM

They cost $2,400 new last I checked and that was about 3 years ago.Get this,I`ve bought two from GM.When I bought the last one GM wanted my old one or a $500 core!Pretty wierd since it was a new crate unit and they don`t sell rebuilts.Just shows the demand and value.If you were nearer,I`d consider it.

68gmcdually · 01-25-2006, 10:30 PM

I guess that I did ok, I bought a running '92 GMC 3500, 5.7l with the NV4500 for $2,300.00 canadian, about $1,900.00 US. Only downside, the PO ran her a little dry on gear oil I think, the synchros grind a little, ok a lot when you try and downshift. I am running the correct ACDELCO oil and it has quieted down a bit but not a lot, any ideas or time for a rebuild. BTW I used that chassis for my '68 buildup.

PICKMUP · 01-25-2006, 11:24 PM

:tj:

**special-K** · 01-26-2006, 12:19 AM

This is a good deal here.I bought new because the parts were up to $1,400 and that was in around`96.Add labor and....
Hey 67K30,I need to get some info one of these days.Your doing thingsalong the lines of some of my plans.Good luck on the sale.

Jim_PA · 01-26-2006, 08:00 AM

Doesn't look too bad to me considering this:

http://www.nv4500.com/catalog/index.php/cPath/3141

68gmcdually · 01-26-2006, 11:04 AM

Quote:

Originally Posted by PICKMUP

:tj:

I don't like to think of it as thread jacking. I like to think of it as we are keeping it up near the top.

01-25-2006, 12:43 AM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	NV4500/205 combo I have a new rebuilt NV4500 that I bought recently and have decided not to use. It's a 99' version with hydrolic bellhousing.It includes the bellhousing and shifter. I have it bolted to a very nice 88' NP205 using an AA adapter. The 205 has been disassembled and cleaned.I repainted it and resealed it. I would take $1700 for just the NV4500 or $2250 for the whole deal.I want to use it but have no need for it at this time . __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

01-25-2006, 06:50 PM	#2
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	Re: NV4500/205 combo I didn't realize that a NV4500 pulled in that much money. That is amazing, I guess that I will be rebuilding mine instead of replacing. Good luck on the sale of yours. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

01-25-2006, 10:11 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: NV4500/205 combo They cost $2,400 new last I checked and that was about 3 years ago.Get this,I`ve bought two from GM.When I bought the last one GM wanted my old one or a $500 core!Pretty wierd since it was a new crate unit and they don`t sell rebuilts.Just shows the demand and value.If you were nearer,I`d consider it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-25-2006, 10:30 PM	#4
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	Re: NV4500/205 combo I guess that I did ok, I bought a running '92 GMC 3500, 5.7l with the NV4500 for $2,300.00 canadian, about $1,900.00 US. Only downside, the PO ran her a little dry on gear oil I think, the synchros grind a little, ok a lot when you try and downshift. I am running the correct ACDELCO oil and it has quieted down a bit but not a lot, any ideas or time for a rebuild. BTW I used that chassis for my '68 buildup. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed, Last edited by 68gmcdually; 01-25-2006 at 10:31 PM.

01-25-2006, 11:24 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,168	Re: NV4500/205 combo :tj:

01-26-2006, 12:19 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: NV4500/205 combo This is a good deal here.I bought new because the parts were up to $1,400 and that was in around`96.Add labor and.... Hey 67K30,I need to get some info one of these days.Your doing thingsalong the lines of some of my plans.Good luck on the sale. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-26-2006, 08:00 AM	#7
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: NV4500/205 combo Doesn't look too bad to me considering this: http://www.nv4500.com/catalog/index.php/cPath/3141



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.