New un-named crew cab project...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 10-08-2011, 10:01 PM

I picked up a 1991 Chevy V3500 today.
It was some type of fleet rig I assume.
It is the fulfillment of another "dream truck" for me.
6.2L diesel, 4L80E, 14 bolt rear, Dana 60 front (got my fingers crossed for 4.56 gears

). The floors and rockers are shockingly solid!!

I have got to get the alternator charging, throw a couple batteries in it, and replace the glow plug controller (someone robbed it). The interior is probably the cleanest of any truck I have ever bought.
I'm not really sure what direction I am going to take it just yet, I'm kinda leaning towards OD green and H1 bead locks with the biggest tire I can get with the least amount of lift.
I'll have to come up with a catchy name for it also....
On to the pics
Name: The day I brought it home 001.jpg
Views: 5079
Size: 50.1 KB

Name: The day I brought it home 001.jpg
Views: 5079
Size: 50.1 KB

Name: The day I brought it home 002.jpg
Views: 6997
Size: 55.6 KB

Name: The day I brought it home 003.jpg
Views: 5018
Size: 45.1 KB

Name: The day I brought it home 004.jpg
Views: 4977
Size: 43.1 KB

Name: The day I brought it home 005.jpg
Views: 4980
Size: 40.8 KB

It's too bad i got rid of my gray interior stuff

joe231 · 10-08-2011, 10:06 PM

more pics

i've already started cleaning up some wiring
Name: The day I brought it home 006.jpg
Views: 6914
Size: 54.1 KB

factory radio!
Name: The day I brought it home 011.jpg
Views: 5621
Size: 41.1 KB

even has a headliner
Name: The day I brought it home 012.jpg
Views: 4958
Size: 24.8 KB

I like the fact that the rear axle is compact
Name: The day I brought it home 013.jpg
Views: 4948
Size: 49.7 KB

the boy and I just finished cleaning out the junk, this is as I brought it home
Name: The day I brought it home 014.jpg
Views: 6844
Size: 61.9 KB

trout · 10-09-2011, 01:45 AM

nice you got antother crew

joe231 · 10-09-2011, 03:10 AM

Thanks!
Yep number 2

Posted via Mobile Device

my4by2 · 10-09-2011, 05:04 AM

Very nice start man - can't wait to see what you end up doing with it!!!

Greenlee · 10-09-2011, 07:51 AM

Sweet truck! You are finding some nice rigs up there in Alaska.

Posted via Mobile Device

cochino12 · 10-09-2011, 09:03 AM

I want a 4wd crew like that soooo bad! Looks good joe

joe231 · 10-09-2011, 02:09 PM

Quote:

Originally Posted by my4by2

Very nice start man - can't wait to see what you end up doing with it!!!

Thanks!!
my brain is racing trying to decide which route I wanna take. I obviously don't want to cut the fenders on this one. I need to figure out how big of a tire I can run as it sits. I want to keep this one simple

Quote:

Originally Posted by Greenlee

Sweet truck! You are finding some nice rigs up there in Alaska.

Posted via Mobile Device

Thanks!
I'm actually pretty surprised how solid this truck is for being up here. It doesn't take long to turn one into a rust bucket.

Quote:

Originally Posted by cochino12

I want a 4wd crew like that soooo bad! Looks good joe

I totally understand Adam!!
I was in the same boat. this one was sitting about a half mile from my house since we have been up here. I finally saw the guy outside and stopped to ask about it. I about fell over when I saw it was a 6.2 with a 4L80E and then he told me how much he wanted for it.......I'll just say I almost felt bad for getting it sooo cheap, almost

MTCK · 10-09-2011, 03:54 PM

Nice truck Joe! Looks like an old Alyeska rig. There are a ton of those all over the state (but few with the OD), part of why we can find 14 bolts and dana 60's so easily up here. I think you could get 285's under it without any trouble...

joe231 · 10-09-2011, 04:13 PM

Quote:

Originally Posted by MTCK

Nice truck Joe! Looks like an old Alyeska rig. There are a ton of those all over the state (but few with the OD), part of why we can find 14 bolts and dana 60's so easily up here. I think you could get 285's under it without any trouble...

Thanks!

I wasn't sure what company, i know I see a ton of trucks all years that are this color, the burb is the same color but it has power windows.

That's kinda what i was thinking, 33's should work....I want bigger though, I may have to lift it a bit eventually

cochino12 · 10-09-2011, 04:24 PM

[QUOTE=joe231;4944042

That's kinda what i was thinking, 33's should work....I want bigger though, I may have to lift it a bit eventually

[/QUOTE]

I know a guy elling some 56" rear 4" leafspretty cheap

joe231 · 10-09-2011, 05:29 PM

Hmmm
I'm interested, but am guessing that shipping up here will cost a fortune....
Posted via Mobile Device

luifer76 · 10-09-2011, 07:29 PM

looks like a good project truck keep the updates coming....

Maxxd07 · 10-09-2011, 08:51 PM

I really hate to see all the stress this rig is causing over tire size so I will be happy to take it off your hands for you.

joe231 · 10-11-2011, 12:43 AM

Quote:

Originally Posted by luifer76

looks like a good project truck keep the updates coming....

thanks!

Quote:

Originally Posted by Maxxd07

I really hate to see all the stress this rig is causing over tire size so I will be happy to take it off your hands for you.

And it gets even better, the 4L80E is backed by a NP205

and the front output has a CV/double cardan joint.

I also found a tag on the front diff, it says 4.10's. a little disappointing but I can't complain

My t-case won't come out of 4hi, I'm not sure if it is the shifter or the case. I'll probably look into that this weekend.

joe231 · 10-11-2011, 07:08 PM

I guess the t-case shifter was just stubborn from sitting. I did some research and decided to try the "bang it into high" method

It worked

I also thought this was interesting
Name: DSC05463.jpg
Views: 4925
Size: 61.1 KB

I guess maybe it is a '91 6.2L, 4L80E, only deal?

Devillusion · 10-13-2011, 11:30 PM

my 6.2L K5 has it to and it is an 90'........good looking truck. Just picked one up myself, but only had the T400/205 combo.

mcbassin · 10-29-2011, 07:25 PM

Cool project Joe! Glad to see you back in the game. Looking forward to another one of your projects.

joe231 · 10-29-2011, 07:34 PM

Quote:

Originally Posted by Devillusion

my 6.2L K5 has it to and it is an 90'........good looking truck. Just picked one up myself, but only had the T400/205 combo.

Cool
Thanks!
Congrats on the new one!

Quote:

Originally Posted by mcbassin

Cool project Joe! Glad to see you back in the game. Looking forward to another one of your projects.

Thanks Mike!!
I just swapped the CCSB for 2 more 4x4 squares

Posted via Mobile Device

mcbassin · 10-29-2011, 08:25 PM

Quote:

Originally Posted by joe231

Thanks Mike!!
I just swapped tge CCSB for 2 more 4x4 squares

Posted via Mobile Device

What the heck.? You swapped off the crew? Why that sucks I was looking forward to seeing where you take it.

Well, I guess I'll get to watch the new ones.

joe231 · 11-16-2011, 03:09 PM

Got some new wheels

And yes I have a front bumper, I'm just too lazy to put it on

Posted via Mobile Device

Jonboy · 11-16-2011, 03:29 PM

What's all that white stuff everywhere? It looks like the end of Scarface.

arrover · 11-16-2011, 03:40 PM

It looks great! What brand and style are those wheels? What size tires?

joe231 · 11-16-2011, 03:56 PM

Quote:

Originally Posted by Jonboy

What's all that white stuff everywhere? It looks like the end of Scarface.

I know right!? I tried snorting it and all it got me was brain freeze!

Quote:

Originally Posted by arrover

It looks great! What brand and style are those wheels? What size tires?

Thanks!!
Eagle alloy (series 100) 16x8, 3.26" BS
285/75/16 COOPER tires
Posted via Mobile Device

mcbassin · 11-16-2011, 05:09 PM

Nice looking wheels Joe! Looks like winter there already

10-08-2011, 10:01 PM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	New un-named crew cab project...... I picked up a 1991 Chevy V3500 today. It was some type of fleet rig I assume. It is the fulfillment of another "dream truck" for me. 6.2L diesel, 4L80E, 14 bolt rear, Dana 60 front (got my fingers crossed for 4.56 gears ). The floors and rockers are shockingly solid!! I have got to get the alternator charging, throw a couple batteries in it, and replace the glow plug controller (someone robbed it). The interior is probably the cleanest of any truck I have ever bought. I'm not really sure what direction I am going to take it just yet, I'm kinda leaning towards OD green and H1 bead locks with the biggest tire I can get with the least amount of lift. I'll have to come up with a catchy name for it also.... On to the pics It's too bad i got rid of my gray interior stuff __________________ *CHEVY ONLY* Last edited by joe231; 10-08-2011 at 10:09 PM.

10-08-2011, 10:06 PM	#2
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... more pics i've already started cleaning up some wiring factory radio! even has a headliner I like the fact that the rear axle is compact the boy and I just finished cleaning out the junk, this is as I brought it home __________________ *CHEVY ONLY*

10-09-2011, 01:45 AM	#3
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: New un-named crew cab project...... nice you got antother crew __________________ Edited by staff

10-09-2011, 03:10 AM	#4
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Thanks! Yep number 2 Posted via Mobile Device __________________ *CHEVY ONLY*

10-09-2011, 05:04 AM	#5
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: New un-named crew cab project...... Very nice start man - can't wait to see what you end up doing with it!!! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

10-09-2011, 07:51 AM	#6
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	Re: New un-named crew cab project...... Sweet truck! You are finding some nice rigs up there in Alaska. Posted via Mobile Device

10-09-2011, 09:03 AM	#7
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: New un-named crew cab project...... I want a 4wd crew like that soooo bad! Looks good joe __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

10-09-2011, 03:54 PM	#9
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: New un-named crew cab project...... Nice truck Joe! Looks like an old Alyeska rig. There are a ton of those all over the state (but few with the OD), part of why we can find 14 bolts and dana 60's so easily up here. I think you could get 285's under it without any trouble... __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

10-09-2011, 04:24 PM	#11
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Re: New un-named crew cab project...... [QUOTE=joe231;4944042 That's kinda what i was thinking, 33's should work....I want bigger though, I may have to lift it a bit eventually [/QUOTE] I know a guy elling some 56" rear 4" leafspretty cheap __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

10-09-2011, 05:29 PM	#12
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Hmmm I'm interested, but am guessing that shipping up here will cost a fortune.... Posted via Mobile Device __________________ *CHEVY ONLY*

10-09-2011, 07:29 PM	#13
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: New un-named crew cab project...... looks like a good project truck keep the updates coming.... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

10-09-2011, 08:51 PM	#14
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: New un-named crew cab project...... I really hate to see all the stress this rig is causing over tire size so I will be happy to take it off your hands for you. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

10-11-2011, 07:08 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... I guess the t-case shifter was just stubborn from sitting. I did some research and decided to try the "bang it into high" method It worked I also thought this was interesting I guess maybe it is a '91 6.2L, 4L80E, only deal? __________________ *CHEVY ONLY*

10-13-2011, 11:30 PM	#17
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: New un-named crew cab project...... my 6.2L K5 has it to and it is an 90'........good looking truck. Just picked one up myself, but only had the T400/205 combo. __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

10-29-2011, 07:25 PM	#18
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: New un-named crew cab project...... Cool project Joe! Glad to see you back in the game. Looking forward to another one of your projects. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

11-16-2011, 03:09 PM	#21
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Got some new wheels And yes I have a front bumper, I'm just too lazy to put it on Posted via Mobile Device __________________ *CHEVY ONLY*

11-16-2011, 03:29 PM	#22
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: New un-named crew cab project...... What's all that white stuff everywhere? It looks like the end of Scarface. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-16-2011, 03:40 PM	#23
arrover Registered User Join Date: Sep 2011 Location: NW Arkansas Posts: 291	Re: New un-named crew cab project...... It looks great! What brand and style are those wheels? What size tires?

11-16-2011, 05:09 PM	#25
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: New un-named crew cab project...... Nice looking wheels Joe! Looks like winter there already __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.