New Member & Parts Wanted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RR67gto · 04-14-2004, 05:06 PM

Greetings everyone, my name is Mike. I'm in Oregon and I'm working on a 62/65 C10 Project. I bought Ol' Rancid about five years ago with a rebuilt factory V8 and already converted to a TH 350. The first thing I did was to install a front and rear EC drop kit along with a 71 C10 rear end. And a new GMPP engine with some nice upgrads such as DUI HEI, and better cam, intake, carb and headers. Flowmaster's make it sound like a monster. But, Rancid was ugly to those who did not love him as I did and the time came to have a make over done. So, I tore the truck to the farme and learned that to 62 cab was to far gone to try saving. I fell into a nice 65 big back window parts truck and removed the cab and replaced all the minor rust areas. So, I'm ready to install the custom hidded tank I had made by EC. The frame is ready for primer and paint and then I'll get working on putting it all together again. But, I need a few small items I don't have. One of them being a decent antenna set up for it. I also would like to know if anyone could tell me where to but the poly rubber products for the 62 frame. I already found a set of NOS ball joiunts for the truch and anyone who is into the pre 63 trucks know what a pain they are to get. I have PS, and the conversion brackets now. So, what I need more than anything are some ideas where to but the better bushings and rubber bumbers for thefront/rear suspension, and frame. Also trailing arm bushings. Anyway, I've been a member of Chevy Talk for a few years, and decided to join here. I'm retired other than work full time as a hudband and Dad for the second time around. So, I have some time to devote to my truck. I'm also a huge Pontiac fan and at the time I own two 68 Firebirds a 67 GTO and 66 Lemans. So, I have more than just this truck taking my time and money. It's nice to have a chance to say hello to everyone. I wish you all a wonderful day and thank you for any ideas you may have. Ideas, are something I never have much problem getting from people in this hobby. What a great thing, having all the information just a click away !! Good day friends.

Mike in Oregon
rr67gto@aol.com

PJ_STYLES · 04-14-2004, 08:15 PM

Welcome to the site! Any pics of your project? It sounds like a good project.

Blue Beard · 04-14-2004, 09:15 PM

Welcome from SW Washington State....

What part of Oregon do you hail from...?

04-14-2004, 05:06 PM	#1
RR67gto Registered User Join Date: Apr 2004 Location: Oregon Posts: 5	New Member & Parts Wanted Greetings everyone, my name is Mike. I'm in Oregon and I'm working on a 62/65 C10 Project. I bought Ol' Rancid about five years ago with a rebuilt factory V8 and already converted to a TH 350. The first thing I did was to install a front and rear EC drop kit along with a 71 C10 rear end. And a new GMPP engine with some nice upgrads such as DUI HEI, and better cam, intake, carb and headers. Flowmaster's make it sound like a monster. But, Rancid was ugly to those who did not love him as I did and the time came to have a make over done. So, I tore the truck to the farme and learned that to 62 cab was to far gone to try saving. I fell into a nice 65 big back window parts truck and removed the cab and replaced all the minor rust areas. So, I'm ready to install the custom hidded tank I had made by EC. The frame is ready for primer and paint and then I'll get working on putting it all together again. But, I need a few small items I don't have. One of them being a decent antenna set up for it. I also would like to know if anyone could tell me where to but the poly rubber products for the 62 frame. I already found a set of NOS ball joiunts for the truch and anyone who is into the pre 63 trucks know what a pain they are to get. I have PS, and the conversion brackets now. So, what I need more than anything are some ideas where to but the better bushings and rubber bumbers for thefront/rear suspension, and frame. Also trailing arm bushings. Anyway, I've been a member of Chevy Talk for a few years, and decided to join here. I'm retired other than work full time as a hudband and Dad for the second time around. So, I have some time to devote to my truck. I'm also a huge Pontiac fan and at the time I own two 68 Firebirds a 67 GTO and 66 Lemans. So, I have more than just this truck taking my time and money. It's nice to have a chance to say hello to everyone. I wish you all a wonderful day and thank you for any ideas you may have. Ideas, are something I never have much problem getting from people in this hobby. What a great thing, having all the information just a click away !! Good day friends. Mike in Oregon rr67gto@aol.com __________________ Build It Fast Build It Right Hold On Tight !!

04-14-2004, 08:15 PM	#2
PJ_STYLES Rockers1/2"off the ground Join Date: Dec 2002 Location: Ontario, Canada Posts: 205	Welcome to the site! Any pics of your project? It sounds like a good project. __________________ 1962 fleetside: bodydropped,shaved,bagged,custom 64 suspension,clear taillights,custom aluminum parts,rollin on 100 spoke player wire wheels. http://www.finelinedesignz.ca

04-14-2004, 09:15 PM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Welcome from SW Washington State.... What part of Oregon do you hail from...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.