|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-05-2004, 11:03 PM
|
#1 |
|
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
What parts are hard to find? 67-72
Please enlighten me on which parts are hard to find for these 67-72 chevy trucks
I frequent the bone yards out here in So Cal, but Ive never really looked for anything other than 65-72 musclecar parts |
|
|
|
05-05-2004, 11:16 PM
|
#2 |
|
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,395
|
tachs, tow hooks, tilts, speed warning dash, AM-FM's, shoulder seat belts, buckets, 8 track player, thats a few things.
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
|
|
|
|
05-05-2004, 11:32 PM
|
#3 |
|
Not too old to learn
Join Date: Mar 2004
Location: SoCal
Posts: 617
|
72 dually, I'm looking for a driveshaft. Must be for longbed it's a double with a carrier bearing attached to frame. Send me a PM for lenghth details etc.
Thanks.
__________________
1968 C10 a way to long restoration. |
|
|
|
|
05-06-2004, 01:26 AM
|
#4 |
|
Senior Member
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
|
what is a speed warning dash?
Ryan |
|
|
|
|
05-06-2004, 03:20 AM
|
#5 |
|
Registered User
 
Join Date: Jan 2003
Location: Safford,AZ
Posts: 3,625
|
Most wanted!!!!!
People are always looking for "original" shift linkage for the AT for these trucks. I had to repair the linkage on mine because no-one had seen these parts for a long time. The trans has an 'I' and the other linkage is an 'H'. I'm sure someone will post pictures.
warrens69gmc |
|
|
|
|
05-06-2004, 05:12 AM
|
#6 |
|
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
How about drums for the front of a 1970 3/4 ton 4wd truck!
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|
|
|
|
|
05-06-2004, 08:03 AM
|
#7 |
|
Never enough time!!
Join Date: Mar 2004
Location: sw Wisconsin
Posts: 601
|
Hey, 8door are you looking for 2 or 4wd driveshaft? I have a complete one out of a 68 3/4 ton 4wd lwb with the carrier bearing.
|
|
|
|
|
05-06-2004, 09:51 AM
|
#8 |
|
Registered User
Join Date: Apr 2004
Location: Clanton, AL
Posts: 1,253
|
You might want to add Power Brake Push Rod. (The one that goes from the brake pedal to the booster rod.
__________________
85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days!  05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal! 
|
|
|
|
|
05-06-2004, 11:31 AM
|
#9 |
|
Senior Member
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
|
drivers side doors rear sport bumper brackets are hard to find around here
|
|
|
|
|
05-06-2004, 11:45 AM
|
#10 |
|
Chevy Freak
Join Date: Sep 2002
Location: Meadville, Pa.
Posts: 2,804
|
Drums
Are the drums different from 69 to 70 (3/4 4x4)? I have a set for a 69.
__________________
69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461 |
|
|
|
|
05-06-2004, 12:44 PM
|
#11 |
|
Senior Member
Join Date: Jun 2002
Location: Murray, Kentucky
Posts: 3,562
|
If you see any 70-72 Blazers, the plastic caps on the tops of the doors are fetching high $, the strip that seals the hatch at the top of the tailgate, good rocker boxes, unrusted windshield frames... rear hatch hardware, thats, all I can think of now
Rg
__________________
Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743 |
|
|
|
|
05-06-2004, 01:56 PM
|
#12 |
|
TOTY 2006
 
Join Date: Dec 1999
Location: Magalia CA USA
Posts: 2,270
|
Things to look for at junkyard
Here is a list off the top of my head of things to pull from a 67-72 truck that you will have no problems selling (as long you don't change an arm and a leg)
Chrome Vent windows, even better if they are factory tinted. Any body or window trim IN PERFECT SHAPE. Perfect 67 style front fender and rear step side fenders Ebrake Cover (67-68) Tach dash Speed warning dash stock AM/FM radio Lighter or radio delete Tow hooks Shoulder belts Complete seatbelt sets (better if near perfect) (67-68) Custom Camper emblems in perfect shape Perfect 67-68 door panels (not metal ones) Perfect Sun Visors Bucket seats Any perfect grills whole or parts Short Fleet bed sides any of the original hub caps if perfect perfect steering wheels heater or AC controls if all levers are not broken There are lots of other things as well, but this is what I look for when I see a new truck in the yard. Most of these things will sell on ebay pretty quickly!! |
|
|
|
|
05-06-2004, 06:03 PM
|
#13 |
|
Not too old to learn
Join Date: Mar 2004
Location: SoCal
Posts: 617
|
72gord My drive shaft need is for a 68 longbed 2 wd I don't know if 4x is the same? I will install a new bearing when I find a shft replacement. What do want for yours shipped to 92504?
__________________
1968 C10 a way to long restoration. |
|
|
|
|
05-06-2004, 07:35 PM
|
#14 |
|
Senior Member
Join Date: Jul 2001
Location: Wellington, Ks
Posts: 10,302
|
8door, I have a two piece drive shaft from a 68 1/2T GMC 2wd LWB. PM if interested. $30 plus shipping.
__________________
1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks |
|
|
|
|
05-06-2004, 10:33 PM
|
#15 |
|
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
Great guys, I will be looking for these items, I know of a couple yards that very few people know about
As far as prices, I personally rather trade for musclecar parts, but if you have nothing to trade, no problem, Im not greedy, I'll ask the group whats fair Some of this stuff I know I'll find, Ive noticed several items listed just in passing by the trucks Seems like alot of 67-8 stuff on the list Last edited by 72dually; 05-06-2004 at 11:17 PM. |
|
|
|
|
05-07-2004, 08:19 AM
|
#16 |
|
Never enough time!!
Join Date: Mar 2004
Location: sw Wisconsin
Posts: 601
|
8Door...my 4x4 lwb driveshaft would be too short for a 2wd, because of the transfer case and transmission compared to just the trans in a 2wd...I'll keeep my eyes open for one though.
|
|
|
|
|
05-08-2004, 01:21 AM
|
#17 |
|
get up! stand up!
Join Date: Apr 2004
Location: austin,tx
Posts: 345
|
i'm always looking for 67-72 chevy/gmc c-30 9ft stepside truck beds complete or parts--paticularly the bedsides in good shape-thanks.
|
|
|
|
|
05-08-2004, 02:45 PM
|
#18 |
|
Registered User
Join Date: May 2000
Location: Palm Springs, Ca.
Posts: 574
|
Let me know if you find a sub in one of those yards. I could use a correct driveshaft too!
__________________
72 C10 Suburban 90 S10 57 F100 (2) 67 Mustang (2) 69 Torino GT 00 Mustang GT Conv. |
|
|
|
|
05-08-2004, 03:53 PM
|
#19 |
|
Registered User
Join Date: Aug 2002
Location: MASTIC BEACH, long island, ny
Posts: 362
|
"What parts are hard to find? 67-72"
HERE ON LONG ISLAND....................ALL OF THEM!!!! THEY'RE USUALLY ROTTED TO SH!@.
__________________
MIKE '67 C/10 2WD LWB '89 MERCURY GRAND MARQUIS LS COUNTRY TILL THE DAY I DIE 
|
|
|
|
|
05-09-2004, 02:17 PM
|
#20 |
|
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
Went to the boneyard yesterday, whew, I found quite a few of the items listed by you guys
I didnt take anything that I thought was marginal in condition, mostly 4's on a 1 to 5 scale I will show pictures as soon as I get my digital back from my sister Please no pm's till I submit photo's of items, plus these are my days off and dont want to be bothered w/shipping chore's right now Here's a few of the items I found 2-4.10 posi units with ring/pinion (tight) 1pr Chrome Vent windows unknown year, was totally stripped 7 pcs body trim, various black and wood grained Ebrake Cover 67-70 dont know year, not like my 72 1 Lighter delete 1 Complete seatbelt sets, gold in color 2 Custom Camper emblems dont know year-(were laying on cab floor, no/pits 5 Sun Visors green, blue, gold 1 nice 67 grille 1 clean heater controls |
|
|
|
|
05-09-2004, 06:48 PM
|
#21 |
|
Account Suspended
Join Date: Apr 2004
Location: N.C. high country
Posts: 6,107
|
How about the door caps that go on top of a blazer door with a no hardtop option. These didnt even have glass in them. I need a set. Look in the build book to see them.
|
|
|
|
|
05-09-2004, 07:22 PM
|
#22 |
|
Senior Member
Join Date: Apr 2004
Location: Northern Arizona
Posts: 687
|
Whats the build book?
Remember, the truck thing is new to me, ask me about 65-72 musclecars and its a different story, Im rarely stumped Send a picture, thats easiest for me I did see a blazer, and also a speed warning set-up, but I had been removing parts for 4hrs, I was tired, and didnt know if I even had enough money to buy the parts I did get, fortunately I did, with a $20 left over to get me a (price gouging) measily 4.2 gallons of regular unleaded Im so sick of california, cant wait to move to Arizona, only a couple more months |
|
|
|
|
06-04-2004, 08:44 AM
|
#23 |
|
70' blazer
Join Date: Apr 2004
Location: Durham, NC
Posts: 71
|
blazer door caps?
Does anyone have a picture with these caps on their blazer door? I have a blazer and haven't found anything that looks like the pictures that I have seen.
|
|
|
|
|
06-06-2004, 09:02 AM
|
#24 |
|
Registered User
Join Date: May 2004
Location: Mt.Airy,MD
Posts: 123
|
If you`re really into going this far,good`67-`68 grille/core supports.I see people looking for these alot.We`ve covered it pretty well,but here`s a couple more.Big block motor brackets and P/S pumps.Good doors,tailgates, and fenders,better than repro.Suburban specifics like:doors(all),gate/hatch,rear 1/4s,gas tanks and A/C parts.Uncracked Blazer hatches and gas tanks.Also shift linkages,2&4wd.and,oh yeah,GMC grilles.Sorry you asked yet?Enjoy yourself.
__________________
72CheyenneSuperK20CustomCamper350/TH350,A/C 72SierreGrandeK2500350/TH350,A/C 72CustomDeluxeK20CustomCamperSB400/4SPD.A/C 72CustomC10SWB,TH400,project |
|
|
|
|
07-15-2004, 11:24 AM
|
#25 |
|
Registered User
Join Date: Jun 2004
Location: richland
Posts: 36
|
What do the door caps usually run in price and does anybody make them aftermarket
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
