|
|
|
07-25-2004, 01:05 PM
|
#1 |
|
It just doesn't matter
 Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
96 Yukon project F/S { price reduction }
{ price reduction}
96 Yukon SLT 4 dr 4wd for sale. Was involved in a moderate R/F collision. repaired, sheet metal replaced, needs paint to be complete. ( I have back-painted the front fenders so they can be bolted on complete. ) Truck runs and drives, has not been on the road yet. There was no motor/ drivetrain damage in the accident. The only underpinning that needed replaced was the r lower "A" frame due to the ball joint being ripped out. Replaced the "A" arm and the ball joint. Also the R outer axle shaft. The truck would not need much to be road worthy. Just lost interest. Have some new parts not installed. Truck has clean title 120k miles. Red/ Tan leather. Seats have some wear. Brand new carpet ( installed) Needs- Windshield A/C condensor Front bumper ( I no longer have a bumper avail at all.) Just no time to finish. Was to be the wifes daily driver, but I have run out of time/ her: out of patience.  Update- I have bought her a 99 K2500 Suburban so this needs to go bye-bye. ( Either that or I am going to rip the 4wd stuff out from under it and 'bag it!! ) Someone please make an offer!!!  Asking 3500. OBO. Truck is located near St. Louis, Mo. Can help with transport if necessary. Thanks- Joe (crews) stvnsn@socket.net I have some pics I can send- not the best quality but pics none the less.
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! Last edited by crews; 09-14-2004 at 04:18 AM. |
|
|
|
08-09-2004, 06:59 PM
|
#2 |
|
<--Thanks 86 Red Bowtie
Join Date: Aug 2003
Location: Mt. Zion IL (Home) Stillwater, OK (School)
Posts: 140
|
__________________
race2c@aol.com 1941 Willys Coupe--Currently being put together. Willy Works fiberglass car. 1969 Chevy K10 SWB--SOLD!!! 1989 Chevy Silverado Z71 RCSB--SOLD!!! 1993 Pontiac Grand Prix--College Commuter |
|
|
|
|
08-09-2004, 10:39 PM
|
#3 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Cam- I still have it....The pics I have are rather grainey but I will send them when I get home....
Update: I have sent the pics.....Let me know if there is anything else you need. Later- crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! Last edited by crews; 08-10-2004 at 12:04 PM. |
|
|
|
|
08-10-2004, 08:42 PM
|
#4 |
|
BIG BLOCK with BIG RIMS
Join Date: Oct 2002
Location: seattle
Posts: 222
|
Pics
Plz send me the pics too j_hodson69@hotmail.com
__________________
 RooRDaDDY68 chev (400 sb) 78 silverado low low (454 bb) Classic GM Truck Club of Washington Member |
|
|
|
|
08-11-2004, 02:21 AM
|
#5 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Ok- I will get them out to you.
Thanks- crews 
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
08-14-2004, 08:19 PM
|
#6 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Might start parting this out since I am not getting any takers...I would need a few commitments on large stuff before I go to the " nuts and bolts" stuff...
Any interest in the drivetrain? Complete 2K obo. ( thats engine/ trans/ transfer case/ and computer(s) ) Can hear run, can drive at this point. Anything else you may need , e-mail or PM me.. Thanks- crews stvnsn@socket.net
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
08-18-2004, 08:46 AM
|
#7 |
|
Registered User
Join Date: Aug 2004
Location: Beavercreek , OH
Posts: 6
|
hey crews , could you send me some pictures K1500_4X4@yahoo.com , thanks
|
|
|
|
|
08-18-2004, 11:55 AM
|
#8 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Pics have been sent....
Thanks- crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
08-18-2004, 05:16 PM
|
#9 |
|
Registered User
Join Date: Aug 2004
Posts: 4
|
crews- got nerf bars on it?
__________________
TOD418 1998 CHEVROLET 4-DR TAHOE LITTLE ROCK, AR. 
|
|
|
|
|
08-18-2004, 05:44 PM
|
#10 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
No...It does not....Sorry..
crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
08-29-2004, 11:43 PM
|
#11 |
|
Registered User
Join Date: Apr 2004
Location: Susanville CA, home of 6000 convicts lol
Posts: 157
|
what kind of seats leather ? I need beige leather for my 95 yukon and tan dashboard cup holder etc REAR A/C??? please let me know thanks Andy
|
|
|
|
|
08-30-2004, 11:20 AM
|
#12 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Yes the seats are beige leather. I am still unsure at this point as to whether I am willing to part it out. Let me know what you are thinking price wise. I imagine shipping will kill the deal though.
Thanks- crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
08-30-2004, 06:56 PM
|
#13 |
|
Registered User
Join Date: Jan 2004
Location: Coweta, Oklahoma
Posts: 2,389
|
Hey can you send pics if you haven't sold already? smirch9@cox.net
|
|
|
|
|
08-31-2004, 02:10 AM
|
#14 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
smirch- I sent them. Let me know if there is anything else you need to know...like where to pick it up at...
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
09-01-2004, 12:56 PM
|
#15 |
|
Registered User
Join Date: Oct 2003
Location: Broken Bow, OK
Posts: 1,385
|
Crews, can you send me pics. I'm interested in the truck. I have been looking for a Tahoe for my GF.
Thanks |
|
|
|
|
09-01-2004, 05:20 PM
|
#16 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
I will need an e-mail address to do that....Let me know
Thanks- crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
09-02-2004, 12:07 AM
|
#17 | |
|
Registered User
Join Date: Oct 2003
Location: Broken Bow, OK
Posts: 1,385
|
Quote:
I pmed you my addy. Thanks
__________________
95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip |
|
|
|
|
|
09-01-2004, 09:08 PM
|
#18 |
|
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
wouldnt it be easier to post a pic here??
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
|
|
|
09-02-2004, 02:26 AM
|
#19 | |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Quote:
Actually the pictures I have are pretty bad...no correct that...they SUCK. Real grainy and not of any real quality. If I had a better digital camera ( I don't know what I was expecting out of a cereal box  LOL!! ) I would take decent pics and ask for some help in posting them.Thanks- Joe (crews)
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
|
09-02-2004, 06:46 AM
|
#20 |
|
Registered User
Join Date: Oct 2003
Location: Broken Bow, OK
Posts: 1,385
|
Can you list the parts that you have that aren't installed in the pics.
Thanks
__________________
95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip |
|
|
|
|
09-02-2004, 02:03 PM
|
#21 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Actually the only parts left now that are not installed are the grill and lower valance.
The list of new parts are as follows: Rebuilt 4 core radiator. New fan shroud New water pump New R lower ball joint New R axle shaft. New water pump New fan clutch and fan New carpet I think that about covers the new stuff. If I think of anything else, I will add it later. Thanks- Joe (crews)
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
09-02-2004, 02:57 PM
|
#22 |
|
Registered User
Join Date: Sep 2004
Location: Elkins, West Virginia
Posts: 2,542
|
motor?
|
|
|
|
|
09-02-2004, 05:13 PM
|
#23 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Its a 5.7 ( 350 ) vortec motor. I would take $1250 for it with the computer. (You remove.)
Thanks- Joe (crews)
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
09-06-2004, 11:07 AM
|
#24 |
|
It just doesn't matter
Join Date: Apr 2001
Location: Huntington Beach, Ca
Posts: 1,660
|
Additional new parts-
After rumaging through my stuff, I realized that I forgot to include the two door handles and new cylinder locks ( all keyed correctly ). The previous owner suffered an apparent break in. I think that covers the new stuff. Any more questions, please ask. I will have some updated pics avail. later today. Thanks- crews
__________________
05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!! |
|
|
|
|
09-06-2004, 11:16 AM
|
#25 |
|
Registered User
Join Date: Apr 2004
Location: Susanville CA, home of 6000 convicts lol
Posts: 157
|
Seats what awould be a fair price actually even jsut seat covers if you want the seats or ?? I also need a beige dash board glove box door cup holder and hood release how much?//
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
or 305 
?
Hybrid Mode
