PARTS FOR SALE and LOTS OF THEM!!

[90blzr]

havent been around in a while, some things came up that are more important. Trying to get rid of alot of stuff we've collected over time. Things came up and need to help out. Parts gotta go. I've tried to seperate them real quick...I am sure I missed some thing or they are in the wrong place, but you can get the idea. Pm me or email me at elcoholic71@yahoo.com

BLAZER PARTS
1989 NP241 t-case, like new, literally, mechanical speedo $350
1989 front and rear driveshafts $40
1990 front and rear driveshafts $40
1990 700R4 transmission $250
1989 K5 rear bumper $50
K5 blazer rear chrome/stainless spoiler (like new) $50
1989 TBI and wiring harness w/computer, complete with gas tank and sending unit $400
1989 front axle, 3.73, new ball joints, truss, axles $150

1989 brand new in box GM firewall insulation $25
1989 brand new in box GM fan $25
1989 inside spare tire carrier $40
1989 brand new GM front spoiler (plastic, under front bumper) $30




DRIVETRAIN PARTS:
TH400 4x4 transmission-32sp, 6 round pattern, 1.5”-2” output, w/converter $200
TH350 4x4 transmission-27sp, 4 hole pattern, 6” output, welded tail $150
1990 350 engine, slight knock on start up (light tick for the first 3-4 seconds of start up, then it runs GREAT.
1990 serpentine setup, complete $200

14bff. 3.73, open, needs rear hub seal $100

14BSF 4.10 ring and pinion, used, excellent shape $75
D60 ring and pinion, new, 4.10, spicer#248075X $150
2000 chevy 4x4 1/2T front differential, 3.73 $250
2000 chevy 4x4 1/2T front axles, brakes, a-arms, etc $200
2000 chevy 4x4 1/2T ext. cab short bed rear driveshaft 68” jt/jt. 5”dia. $100




TIRES/WHEELS:
Eagle 589, 16x10, 5on135 $50
37x12.50x15 SSR 90% tread(spare) $100
(3) 38.5x14.50x15 SX 15% tread (spares) $25ea.
35x12.50x15 SSR on white steal rim (6on6.5) 20% $30
36x12.50x16TSLR 15% tread $30
38x15.50x15 Ground Hawg Radial II’s like new, also have extra spare $800
Gianelle center caps (3) $50ea


MISC:
2000 chevy 1/2T 4x4 brake booster/master cylinder $75
2000 chevy Interior panels, dash pad, cluster,carpet, headliner $50 and up
2000 chevy ext. cab doors $150
2000 chevy rear bumper, small dent $50
2000 chevy ext. cab shortbed Flowmaster exhaust system, cat back $150

2000 chevy y-pipe and cats, like new (5.3) $100
2000 chevy back defrost window $75
2000 chevy quarter window $25
2000 chevy 4x4 switch $50
1999 S-10 chevy turn signal/parking lenses, stock and aftermarket $20/stock, $40/new after.
1992-99 chevy front fenders, trimmed for 20’s $50/pr.
1985/86 Supra parts, 7M-GE engine, tranny, doors, rear hatch, rear end $100 and up
Front tube pre-runner bumper/light bar, 88-98 chevy $150
80’s suburban quarter panel, drivers side $40
12 bolt chevy axles, 5 lug $50
Fiberglass hood, 70-72 chevelle/elcamino $75
1999 Chevy S-10 bench seat, gray cloth, like new $100




LIFT KITS/LOWERING
Monster C-Notch fullsize chevy, 92-99 $50

Gap Guards, #6533, 92-99 tahoe, suburban, 2002 avelanche (4x4) $50
BDS 6” lift kit, brand new 92-99 chevy 1/2t 4x4, complete $1000
PA NEW 3” body lift #123, 95-99 tahoe, Yukon, suburban $ $150
Airlift air springs #60769 $50
4” Trailmaster lift kit, great shape 92-98 chevy 1/2T 4x4 with skid plate$500
Leveling kit, chevy 8 lug HD, 99-2004 $125
Bags, slam specialties (all new): (2)HS62, (2)RS62, (3)ES62, (12)ES72, (2)ES82 $70 and up
10-switch box, clear (good box)$90
(2) regulators (9) helium tanks, S, M, K, T

HONDA PARTS:
1990 civic si drivers side headlight $10
1990 civic si bumper turn signals $15
1990 civic si exhaust, y-pipe back, with brand new cat $15
1990 civic si hatch w/wiper, spoiler and defrost $100
1990 civic si quarter glass $25
2001 honda accord (2dr) truck floor and side compartments, gray, like new $50

ELLIS MITRE/BAND SAW
Model 1600
Blade:10”x1”x.035
7” round @ 45*
10” round @ 90*
11” flat @ 90*
Like new, hardly ever used. Works great. Has extra roller stand with it. Paid $2500 and its hardly used. $1800

CHEVY SHORTBED 4x4:
I hate to sell it, but I guess its gotta go. This was gonna be a long term project. It is a shortbed chevy 4x4. Its a rolling body. 12bolt rear, D44 front. It is pefect for california, it wont require smog as it is registerd as a 73 and cheap insurance because its registered as a 2wd. Here is the deal. Its a 1973 chevy 2wd cab, line-x'd inside. The cowl section has already been modified and fitted with a 1986 front clip, complete. it has power doors installed. Basically looks like an '86 chevy shortbed.
This truck is STRAIGHT and ZERO RUST. Bed, fenders, cab...everything is damn near perfect. I would be that you will almost NEVER find a truck as rust free and straight as this one. It is a SWEET project to start. It has a clear title. Have some extra parts to go with it. It does have a nice bench seat to go with it also. Parting it out will bring a nice price with all the nice sheetmetal, but I dont have the time and its too good of shape to seperate.
$1000


I have many more parts, so if you need something, I problaby have it. It sucks, but its time to clean out.

[ocbaud]

1989 K5 rear bumper $50

whats this look like?

[Destructo]

Originally Posted by ocbaud

1989 K5 rear bumper $50

whats this look like?

it will be a non-step chrome rear bumper.

Man, too bad you aren't closer to me, I could make a list from your list of parts I want hehe, but their all the big parts and shipping kills it.

[90blzr]

Originally Posted by Destructo

it will be a non-step chrome rear bumper.

Man, too bad you aren't closer to me, I could make a list from your list of parts I want hehe, but their all the big parts and shipping kills it.

If you are near a forward air, shipping really isnt too bad. Especially if you are buying a bunch of parts. Obviously not as cheap as if you were on THIS SIDE OF THE COUNTRY!! :p

[90blzr]

Originally Posted by ocbaud

1989 K5 rear bumper $50

whats this look like?

Another member pretty much answered the question already. Its just plain..no black...all chrome.

EDIT:
Actually now that I think about it...I think its off of an '85....the 89 still had the black strip I think.

[beaterC10]

Does anyone have an idea what shipping the rolling body from Cali to Indy might run? Do you have any pictures of the body? Does it include the glass, wiring, underhood stuff, or interior?

Dave

[90blzr]

[90blzr]

[kevinr1970]

Would that T350 tranny work in an '81 K5 without mods? What shape is it in?

[90blzr]

Originally Posted by kevinr1970

Would that T350 tranny work in an '81 K5 without mods? What shape is it in?

I am not positive on that, you may want to ask around. If you have a TH350 now with the long shaft, then I dont see why it wouldnt work for you.
It was a runner when pulled!

[rich-white]

Dave Check with a company called fleet car out of Tulsa, OK. They just got the contrct to ship Ford Explorers from the Hazlewood Mo plant and haul customer cars for a back haul. Also pick up a copy of Hemmings Motor news they have a lot of small hauling companies and see who might be looking for a back haul. You might check with Ligon-Landstar flatbed div. see if they have anything rolling this way. Cheap freight pays more than no freight.

[buffle]

Price shipped ? ..............zip 64055