FS in SC 700R4/208 LWB 1/2 rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

clarkjw24 · 11-08-2004, 04:12 PM

I've got a 700R4/NP208 combo with drive shafts for a lwb 1/2. $450
Also the complete rolling chassis for this 87 truck. 10 bolts/3.08s, includes the wiring to the tail lights, steering box, swaybar, axles, springs, 3" blocks front/rear?, roller tires on ralleys/no caps or rings. $300
I bought this truck for the TBI, drove it on the trailer and brought it home. The 4wd worked fine. Also have the 350 but it needs rebuilding, smoked like crazy. I can leave whats left of the body on it or can remove if not wanted. Delivery is possible to surrounding states. Would rather sell all of it at once so offers welcome. I need to sell soon b/c I borrowed some of the money to buy this thing.
The cab has a good sliding back glass and decent trim and seat. Interior is blue. The bed is beat up pretty bad and the tailgate is dented.

*bisquik65* · 11-08-2004, 07:33 PM

Can you get some pics? Erick

clarkjw24 · 11-08-2004, 09:03 PM

I'll get sum pics in the morning.

griswold510 · 11-08-2004, 09:56 PM

im interested clark.

clarkjw24 · 11-09-2004, 01:42 PM

Here a few pics.

griswold510 · 11-09-2004, 02:37 PM

so how much for basically everything there but cab, bed and engine?

clarkjw24 · 11-09-2004, 02:42 PM

$650 you come and get it. I'll remove the bed,cab,clip and motor.

clarkjw24 · 11-15-2004, 11:02 AM

ttt

clarkjw24 · 11-17-2004, 10:13 PM

I'll part anything off of this truck you want minus the tbi and wiring.

ElGracho · 11-17-2004, 11:28 PM

I'm interested in the two fuel tank sending units.

Gunny · 11-23-2004, 03:47 PM

Just wanted to pass on that I met John last week when I picked up a transfer case I bought from him.

He is Top Notch, gives a heck of a deal and seems to go out of his way to be helpful.

THANKS JOHN for helping me get my burban on the road.
Gunny

**guyryan100** · 12-08-2004, 10:38 PM

Still sitting on that power steering gear box? Need the pitman arm too...

clarkjw24 · 12-09-2004, 01:45 PM

Quote:

Originally Posted by guyryan100

Still sitting on that power steering gear box? Need the pitman arm too...

??? I'm sorry was I susposed to send you some parts?

**guyryan100** · 12-09-2004, 08:22 PM

Quote:

??? I'm sorry was I susposed to send you some parts?

No, no. Sorry - that was my way of asking if you still had the power steering gear and box....

clarkjw24 · 12-09-2004, 09:21 PM

Quote:

Originally Posted by guyryan100

No, no. Sorry - that was my way of asking if you still had the power steering gear and box....

Ohh. Yeah I've got all of that.
So your asking about:

1. the power steering pump/canister/pully
or
2. the steering/gear box with the pitman arm (I'm betting this one)

Shoot me an offer and I'm sure I can get them out to you.

clarkjw24 · 12-20-2004, 02:41 PM

Still alot of truck left. Parts anyone? Good tranny and tcase. Straight frame. Matching axles. Drive shafts. Drivers side gas tank. Tailgate parts.

11-08-2004, 04:12 PM	#1
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	FS in SC 700R4/208 LWB 1/2 rolling chassis I've got a 700R4/NP208 combo with drive shafts for a lwb 1/2. $450 Also the complete rolling chassis for this 87 truck. 10 bolts/3.08s, includes the wiring to the tail lights, steering box, swaybar, axles, springs, 3" blocks front/rear?, roller tires on ralleys/no caps or rings. $300 I bought this truck for the TBI, drove it on the trailer and brought it home. The 4wd worked fine. Also have the 350 but it needs rebuilding, smoked like crazy. I can leave whats left of the body on it or can remove if not wanted. Delivery is possible to surrounding states. Would rather sell all of it at once so offers welcome. I need to sell soon b/c I borrowed some of the money to buy this thing. The cab has a good sliding back glass and decent trim and seat. Interior is blue. The bed is beat up pretty bad and the tailgate is dented. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-08-2004, 07:33 PM	#2
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	pics? Can you get some pics? Erick

11-08-2004, 09:03 PM	#3
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	I'll get sum pics in the morning. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-09-2004, 01:42 PM	#5
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Here a few pics. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs Last edited by clarkjw24; 11-09-2004 at 01:50 PM.

11-09-2004, 02:42 PM	#7
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	$650 you come and get it. I'll remove the bed,cab,clip and motor. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-08-2004, 09:56 PM	#4
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	im interested clark.

11-09-2004, 02:37 PM	#6
griswold510 Registered User Join Date: Sep 2004 Location: kennesaw GA Posts: 73	so how much for basically everything there but cab, bed and engine?

11-15-2004, 11:02 AM	#8
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	ttt __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-17-2004, 10:13 PM	#9
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	I'll part anything off of this truck you want minus the tbi and wiring. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-17-2004, 11:28 PM	#10
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I'm interested in the two fuel tank sending units. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

11-23-2004, 03:47 PM	#11
Gunny runnin on empty Join Date: Jun 2004 Location: Middle Georgia Posts: 115	Just wanted to pass on that I met John last week when I picked up a transfer case I bought from him. He is Top Notch, gives a heck of a deal and seems to go out of his way to be helpful. THANKS JOHN for helping me get my burban on the road. Gunny __________________ 88 GMC Suburban - 6.2 Diesel 4x4 87 Jeep Cherokee - 6" lift, 32 bfg's, way too many mods to list. 65 Thunderbird - Stock United States Marine Corps SEPIUS EXERTUS, SEMPER FIDELIS, FRATER INFINITAS "Often Tested, Always Faithful, Brothers Forever"

12-08-2004, 10:38 PM	#12
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 483	Still sitting on that power steering gear box? Need the pitman arm too...

12-20-2004, 02:41 PM	#16
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	Still alot of truck left. Parts anyone? Good tranny and tcase. Straight frame. Matching axles. Drive shafts. Drivers side gas tank. Tailgate parts. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.