Attn: Ocbaud and TIMSPEED - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 11-24-2004, 09:49 PM

Didn't you guys have flywheel problems? Cracked or broke. What did it do? Did it knock?

ocbaud · 11-24-2004, 09:58 PM

my stock flexplate was cracked pretty bad about a year and a half ago on the 305. i had a shop replace it along with the rear main seal that was leaking.

the ticking wasnt noticable while driving, but you could hear it if i went in reverse at any speed whatso ever. it would make the ticking sound every once in a while right after i come out of park and tap on the gas in drive.

picture this:

the big round holes that are all around the flexplate. well, i had cracks running from at least 4 of the crank bolts all the way to each of those holes.

Slonaker · 11-25-2004, 12:46 AM

When the flexplate on my friend's C10 cracked, it just made a clicking sound when the engine was running.

Slonaker

BowTieMan · 11-25-2004, 01:03 AM

My 88 4.3 blazer makes a high click at idle. Then when you go to about 1500 rpm it speeds up then at 2000 its completely gone. And when I kick the air on at idle - 1500 its is a really loud fast click. And it sounds like it is coming from under the truck and the back of the motor. Think its the flexplate?

ocbaud · 11-25-2004, 01:36 AM

Quote:

Originally Posted by BowTieMan

My 88 4.3 blazer makes a high click at idle. Then when you go to about 1500 rpm it speeds up then at 2000 its completely gone. And when I kick the air on at idle - 1500 its is a really loud fast click. And it sounds like it is coming from under the truck and the back of the motor. Think its the flexplate?

sounds like it is

MylilBowTie · 11-25-2004, 01:21 AM

Mine the whole center broke out from the rest of the flexplate. Funny thing was it still started right up and not even a hint of it being bad. I found this out when I changed the transmission that went out. If you loosen the convertor and push it back. Take a screwdriver metal end and tap the flexplate. If it rings like a bell its said to be good, if its dull its said to have a fracture in the flexplate.

gldevall · 11-25-2004, 01:33 PM

That is what I think it is. It is a $20 flywheel from AutoZone. I figure I have between 300-350 ft/lbs of torque running through it. I don't think that it is strong enough to handle that much

cochran63 · 11-25-2004, 03:10 PM

I didn't want these problems with my BB so i ordered a tci one for my truck.

TIMSPEED · 11-25-2004, 06:08 PM

I didn't have flexplate problems..just had the wrong starter. Now, my truck starts nice and queitly.

ocbaud · 11-25-2004, 06:50 PM

Quote:

Originally Posted by cochran63

I didn't want these problems with my BB so i ordered a tci one for my truck.

qft

i got a nice sfi approved tci one for my engine

SanitysBane · 11-25-2004, 06:51 PM

i got a generic sfi arpoved, good enough for me

11-24-2004, 09:49 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Attn: Ocbaud and TIMSPEED Didn't you guys have flywheel problems? Cracked or broke. What did it do? Did it knock? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

11-25-2004, 12:46 AM	#3
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	When the flexplate on my friend's C10 cracked, it just made a clicking sound when the engine was running. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

11-25-2004, 01:03 AM	#4
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	My 88 4.3 blazer makes a high click at idle. Then when you go to about 1500 rpm it speeds up then at 2000 its completely gone. And when I kick the air on at idle - 1500 its is a really loud fast click. And it sounds like it is coming from under the truck and the back of the motor. Think its the flexplate? __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

11-25-2004, 01:21 AM	#6
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Mine the whole center broke out from the rest of the flexplate. Funny thing was it still started right up and not even a hint of it being bad. I found this out when I changed the transmission that went out. If you loosen the convertor and push it back. Take a screwdriver metal end and tap the flexplate. If it rings like a bell its said to be good, if its dull its said to have a fracture in the flexplate. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

11-25-2004, 01:33 PM	#7
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	That is what I think it is. It is a $20 flywheel from AutoZone. I figure I have between 300-350 ft/lbs of torque running through it. I don't think that it is strong enough to handle that much __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

11-24-2004, 09:58 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	my stock flexplate was cracked pretty bad about a year and a half ago on the 305. i had a shop replace it along with the rear main seal that was leaking. the ticking wasnt noticable while driving, but you could hear it if i went in reverse at any speed whatso ever. it would make the ticking sound every once in a while right after i come out of park and tap on the gas in drive. picture this: the big round holes that are all around the flexplate. well, i had cracks running from at least 4 of the crank bolts all the way to each of those holes.

11-25-2004, 03:10 PM	#8
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	I didn't want these problems with my BB so i ordered a tci one for my truck. __________________ Youth soon passes away, but immaturity can last a life time.

11-25-2004, 06:08 PM	#9
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	I didn't have flexplate problems..just had the wrong starter. Now, my truck starts nice and queitly. __________________ I have a few cars... See Them Here

11-25-2004, 06:51 PM	#11
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	i got a generic sfi arpoved, good enough for me __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.