4x4 Sway Bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

avejoe · 11-27-2004, 10:21 PM

I remember reading a tech tip somewhere on installing a sway bar on a 4x4. Anybody remember where this tech tip is?

Thanks!

71RestoRod · 11-28-2004, 09:38 PM

If your are looking to convert a later model 4x4 swaybar onto your '72...

Steve Chin did a write-up several years ago. His Blazer sat stock height. The link is still good:

Steve Chin's Swaybar Mounts

I built off of his idea and came up with these... Mine is lifted ~4" and I used ORD quick disconnects to help out with the geometry:

71RestoRod's Swaybar Mounts

11-27-2004, 10:21 PM	#1
avejoe Custer had a plan too. Join Date: Dec 2003 Location: No. California Posts: 344	4x4 Sway Bar I remember reading a tech tip somewhere on installing a sway bar on a 4x4. Anybody remember where this tech tip is? Thanks! __________________ 72 K15 GMC (aka Big White) Performance Rockers, Cab Corners, and Floors Fossil Fuel Glutton Neighborhood Nuisance 98 BMW 540i for Speed (Sold ) 05 Subaru Outback for mileage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-28-2004, 09:38 PM	#2
71RestoRod Registered User Join Date: Sep 2003 Location: Evergreen, CO Posts: 492	If your are looking to convert a later model 4x4 swaybar onto your '72... Steve Chin did a write-up several years ago. His Blazer sat stock height. The link is still good: Steve Chin's Swaybar Mounts I built off of his idea and came up with these... Mine is lifted ~4" and I used ORD quick disconnects to help out with the geometry: 71RestoRod's Swaybar Mounts



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.