|
|
|
03-31-2001, 09:01 PM
|
#1 |
|
Registered User
Join Date: Feb 2001
Location: Hamilton,Texas
Posts: 66
|
Disc brake swap
Ok I have a donor 81 chev 1/2 ton truck. to swap to a 69 I take everything off the front of the 80 and put on the 69? upperand lower a frames, drag links cross member and all. Right? Someone said something about drilling new holes for something? where? Thanks
__________________
Bulldog in Hamilton, Texas 69 GMC Stepside 350 Voetec SBC |
|
|
|
03-31-2001, 09:59 PM
|
#2 |
|
GMC RULES
Join Date: Feb 2001
Location: Central Ohio
Posts: 154
|
Bulldog, I did a disc brake swap on a 68 about a year ago.The parts truck was a 79. I left the stock A-arms and put 79 ball joints on them.(the studs are longer on the newer ball joints because the spindles are thicker)
Then I used the spindles,tie rod ends,and center link from the 79. I didn't have to change the pitman arm or the idler arm. Hope this helps. ------------------ 70 Chevy C/20 72 GMC 1500-SWB 72 GMC K/2500
__________________
70 Chevy C/20 72 GMC K /2500 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
