how much for th350 rebuild - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 01-18-2005, 07:12 PM

how much are you guys paying for a basic th350 rebuild. just taking the tranny in, not actual;y having them uninstall/install?

thanks

phantom dually · 01-18-2005, 07:16 PM

couldnt be more than $400 or so for a basic rebuild?? I paid $1000 for a really beefed up unit with a custom built stall. This was with a manul valve body and other upgraded goodies. BTW its for sale!!

hotrodhomi · 01-18-2005, 08:01 PM

$450 in sacramento last year.

bigblock73 · 01-18-2005, 08:12 PM

$400 for me a few years back for a bench rebuild and shift kit install.

cochran63 · 01-18-2005, 08:21 PM

About 4 months ago I gave 250 to have my th350 rebuilt with the hardened 2nd gear sprag. That price was without a new converter. I think it was about 30 higher with a converter.

Blue Beard · 01-18-2005, 09:24 PM

Get the basic around here for about $250

67_SS396 · 01-18-2005, 10:27 PM

Ryan, I paid $150 at KW Trans. in Balch Springs to have the 400 rebuilt with shift kit and manual valve body minus the converter.

Fatblock82 · 01-19-2005, 03:57 AM

Isn't there a trans guy on here?I thought I seen some stuff from a trans builder,could have been a different site though.

jet mec · 01-19-2005, 04:03 AM

$300 basic rebuild w/out the converter is the going price here

*1972C10* · 01-19-2005, 05:41 AM

275 W New Convertor And Shift Kit Thats In Quinlan .

alpha_male0203 · 01-19-2005, 10:02 AM

Here in iowa where i am at anyways its hard to find people to do that. but if you do its like 400.

01-18-2005, 07:12 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	how much for th350 rebuild how much are you guys paying for a basic th350 rebuild. just taking the tranny in, not actual;y having them uninstall/install? thanks __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-18-2005, 07:16 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	couldnt be more than $400 or so for a basic rebuild?? I paid $1000 for a really beefed up unit with a custom built stall. This was with a manul valve body and other upgraded goodies. BTW its for sale!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-18-2005, 08:12 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	$400 for me a few years back for a bench rebuild and shift kit install. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-18-2005, 08:21 PM	#5
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	About 4 months ago I gave 250 to have my th350 rebuilt with the hardened 2nd gear sprag. That price was without a new converter. I think it was about 30 higher with a converter. __________________ Youth soon passes away, but immaturity can last a life time.

01-18-2005, 09:24 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Get the basic around here for about $250 __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-18-2005, 08:01 PM	#3
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	$450 in sacramento last year.

01-18-2005, 10:27 PM	#7
67_SS396 Registered User Join Date: Mar 2000 Location: Blue Ridge, Tx Posts: 1,172	Ryan, I paid $150 at KW Trans. in Balch Springs to have the 400 rebuilt with shift kit and manual valve body minus the converter. __________________ Fawker Fab three seater rock crawler buggy 498 BBC/SM465/203/205 doubler, propane, 5.13's, 42" PB Rockers '66 C10 - The new hot rod '77 3+3 Dually - 12 valve 4wd conversion tow rig project '28 Ford 2 door sedan street rod RevLimit Offroad "Hang on beer, we can do this."

01-19-2005, 03:57 AM	#8
Fatblock82 Registered User Join Date: Jan 2005 Posts: 11	Isn't there a trans guy on here?I thought I seen some stuff from a trans builder,could have been a different site though.

01-19-2005, 04:03 AM	#9
jet mec Registered User Join Date: Sep 2004 Location: Ga Posts: 30	$300 basic rebuild w/out the converter is the going price here

01-19-2005, 05:41 AM	#10
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	275 W New Convertor And Shift Kit Thats In Quinlan .

01-19-2005, 10:02 AM	#11
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	Here in iowa where i am at anyways its hard to find people to do that. but if you do its like 400. __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.