Sping legnth on 79 burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Staceydude · 02-02-2005, 01:53 AM

Hello,

Does anyone know the spring length on 79 Burban.

These are the heavy duty springs from a trailering special. Still installed so I do not know if they could be measured on the truck.

regards

Stace

u2slow · 02-02-2005, 10:07 AM

There's 52" and 56" springs. Most Burbs I've seen have the 56" ones.

The 52" springs measure the same distance (26/26") from the axle to either eye. The 56" springs are longer on the backside (26/30").

02-02-2005, 01:53 AM	#1
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Spring legnth on 79 burb Hello, Does anyone know the spring length on 79 Burban. These are the heavy duty springs from a trailering special. Still installed so I do not know if they could be measured on the truck. regards Stace Last edited by Staceydude; 02-02-2005 at 10:18 AM.

02-02-2005, 10:07 AM	#2
u2slow Web Wheeler Join Date: Jan 2000 Location: BC, Canada, eh? Posts: 388	There's 52" and 56" springs. Most Burbs I've seen have the 56" ones. The 52" springs measure the same distance (26/26") from the axle to either eye. The 56" springs are longer on the backside (26/30"). __________________ '66 C10 longstep - Clifford equiped '84 C20 Suburban 6.2L - awaiting 4x4 conversion '91 V3500 Crewcab - awaiting diesel swap

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.