Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
02-24-2005, 11:28 PM | #1 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
LT1 engine complete running from 95-96 Impala SS
A friend of mine has a good running when pulled engine from a 95-96 Impala SS car. Has everything from waterpump to optispark to the fuel injectors, throttle body etc etc. Has been sitting about 2 yrs inside his heated garage. Engine has around 90k miles. Dont beleive it has any of the wiring harness. Does have exhaust manifolds also. $300. Can be crated and shipped if you want to pay the $$. Or pickup in Louisville KY 40216
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
02-25-2005, 07:08 PM | #2 |
Registered User
Join Date: Nov 2001
Location: independence mo usa
Posts: 333
|
300 bux for an lt1?
__________________
www.krazykustumzkc.com |
02-25-2005, 08:01 PM | #3 |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
pics?
|
02-25-2005, 08:05 PM | #4 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
LT1 YES!! I will try to get some this weekend. Thanks
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
02-25-2005, 09:27 PM | #5 |
Registered User
Join Date: Jan 2005
Location: Louisville KY area
Posts: 187
|
dude thats one sweet deal I wish you had the harness and computer I would buy it from you
|
02-25-2005, 10:13 PM | #6 |
Registered User
Join Date: Nov 2001
Location: independence mo usa
Posts: 333
|
whats your zip? I wanna figure how and how much for shipping
__________________
www.krazykustumzkc.com |
02-25-2005, 10:21 PM | #7 |
Registered User
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
|
Phantom--I will post this on the ISSF and a few other forums where B-Body owners might be interested...
__________________
FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection |
02-26-2005, 12:34 AM | #8 | |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
Quote:
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
02-26-2005, 12:35 AM | #9 | |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
Quote:
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
|
02-26-2005, 12:49 AM | #10 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
Anyone ever carbureted one of those?
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
02-26-2005, 02:34 AM | #11 | |
Registered User
Join Date: Jan 2005
Location: Louisville KY area
Posts: 187
|
Quote:
|
|
02-26-2005, 12:34 AM | #12 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
Do you all think he is selling to cheap?? Zip is 40258 from business dock. I get a good discount so check your $$ and Ill check mine and see if I can beat it. Thanks Eric
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
02-26-2005, 12:54 AM | #13 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
It can be done with the right intake. I believe you would have to leave the opti in the front and run a normal distributor?
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
02-26-2005, 01:01 AM | #14 | |
Registered User
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
|
Quote:
__________________
FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection |
|
02-26-2005, 01:06 AM | #15 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
man, i'd buy it if I wasn't so far away, I don't think its worth a 7 hour 40 min drive one way
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
02-26-2005, 01:14 AM | #16 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
there is always shipping!!!!!
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 |
02-26-2005, 01:26 AM | #17 | |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
Quote:
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
|
02-26-2005, 02:38 AM | #18 |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
the LT1 setup is very different from the 96-99 Vortec design.
Last edited by 1FaastC10; 02-26-2005 at 02:40 AM. |
02-26-2005, 10:54 AM | #19 |
Registered User
Join Date: Sep 2003
Location: Lewisville, NC
Posts: 1,836
|
I just checked summit for intake manifold prices, only one they make is from GM Performance parts and costs 260 bucks
__________________
1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle. |
02-26-2005, 11:48 AM | #20 |
Registered User
Join Date: Dec 2003
Location: Ft. Worth, TX
Posts: 86
|
ss lt1's also have iron heads.
|
02-26-2005, 09:59 PM | #21 |
Registered User
Join Date: Dec 2002
Location: Chillicothe OHIO
Posts: 717
|
If you have any pics, shoot them to me at commagic@bright.net I'm pretty interested. What would it cost to get it shipped to 45601 (business dock)?
__________________
Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto |
02-27-2005, 12:33 AM | #22 |
Project92 SWB stepside
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
|
Im going to get pics sunday. I will also get casting # and start looking up shipping. It would be safe to fiqure it from 40258 business dock on a 48x48 pallet also 3' tall. Weight should be guessed at 450# just to be safe.
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448 Last edited by phantom dually; 02-27-2005 at 08:47 PM. |
02-27-2005, 03:47 PM | #23 |
Registered User
Join Date: Oct 2002
Location: Cleveland, OH
Posts: 429
|
i'm out, wish i could but i just bought a jeep with the $
|
02-27-2005, 04:06 PM | #24 |
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
If you decide you are willing to part it out a bit, I'd very much like the intake, fuel rails and injectors. I don't need the throttle body, EGR stuff etc
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
02-27-2005, 04:34 PM | #25 |
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
awaiting pics... once casting numbers and everything are posted, if everything is kosher, i'll take it. just a matter of finding the time to come get it.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|