Desperately needed! Bronze thrust washer D44 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redz 1970 K5 · 03-04-2005, 08:36 PM

There is a bronze thrust washer before the axle shaft goes into the spindle. Dealer can't get me a part #, and I can't find the dang thing anywhere!

Anyone know what I am talking about, and does anyone have one? Would be more then happy to pay a few bucks for it...

If anyone has a GM parts manual, if you could get me a part #, I would be eternally grateful.

thx!

LONGHAIR · 03-04-2005, 08:52 PM

Try one from a newer truck. They are some kind of nylon type plastic, but they seem to wear very well. Remember to put it on with the wide part of the taper away from the spindle side. That taper is to fit around the radius on the axle itself. There is a rubber seal there too.....

72k5 · 03-05-2005, 12:42 AM

Yup, it's part of a kit. You should be able to get one at any parts store - at least those with intelligent help. I think the little lip seal and the Torrington bearing come with it.

4x4Poet · 03-05-2005, 03:43 AM

Try a bearing sales store for the spindle seal kit. Should be cheaper than auto parts stores. Usually by 10-30% at my local bearing sales.

nu2-72 · 03-05-2005, 01:36 PM

# is 3979677.

redz 1970 K5 · 03-07-2005, 03:26 PM

Quote:

Originally Posted by nu2-72

# is 3979677.

Thanks... Dealer has no idea what I am talking about, but the part # is a good start!

nu2-72 · 03-07-2005, 03:55 PM

It is called a spacer in their book.

redz 1970 K5 · 03-07-2005, 04:58 PM

Quote:

Originally Posted by nu2-72

It is called a spacer in their book.

Guy tried as hard as he could to cross reference the part and we came up blank... Finally I told him to lookup the part for a 76 K5 with a D44 (last year in their computer system), and got a part # for the spacer. I am SURE that a spacer for a 76 D44 will work for a 71 D44 (discs). Even if it's Nylon or whatever.

#376852 is what we ended up with, and I ordered it. It will be in tomorrow. Wish me luck!

Thanks for the help.

nu2-72 · 03-07-2005, 06:18 PM

I just did an 87 3/4 ton and the spacers are plastic and the same.
Here are what you wanted.

redz 1970 K5 · 03-07-2005, 06:33 PM

Yup, that's exactly what I'm missing. Wish I could have found em, but I guess the plastic will work fine.

Thanks for all of your help. VERY helpful.

nu2-72 · 03-07-2005, 08:14 PM

Found you one in Napa, Ca.
The guy must be on drugs though. $31.68 for one. I just bought some more for $2.00 each.

03-04-2005, 08:36 PM	#1
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Desperately needed! Bronze thrust washer D44 There is a bronze thrust washer before the axle shaft goes into the spindle. Dealer can't get me a part #, and I can't find the dang thing anywhere! Anyone know what I am talking about, and does anyone have one? Would be more then happy to pay a few bucks for it... If anyone has a GM parts manual, if you could get me a part #, I would be eternally grateful. thx! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

03-05-2005, 03:43 AM	#4
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Try a bearing sales store for the spindle seal kit. Should be cheaper than auto parts stores. Usually by 10-30% at my local bearing sales. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

03-05-2005, 01:36 PM	#5
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	# is 3979677. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-07-2005, 03:55 PM	#7
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	It is called a spacer in their book. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-07-2005, 06:18 PM	#9
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	I just did an 87 3/4 ton and the spacers are plastic and the same. Here are what you wanted. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

03-04-2005, 08:52 PM	#2
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	Try one from a newer truck. They are some kind of nylon type plastic, but they seem to wear very well. Remember to put it on with the wide part of the taper away from the spindle side. That taper is to fit around the radius on the axle itself. There is a rubber seal there too.....

03-05-2005, 12:42 AM	#3
72k5 Registered User Join Date: Oct 2002 Location: Livermore, CA Posts: 566	Yup, it's part of a kit. You should be able to get one at any parts store - at least those with intelligent help. I think the little lip seal and the Torrington bearing come with it. __________________ 350 ETec 170 heads, Performer, HEI, Holly TBI, 700r4, 14 bolt rear, F&R lockers, lots of off road improvements.

03-07-2005, 06:33 PM	#10
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Yup, that's exactly what I'm missing. Wish I could have found em, but I guess the plastic will work fine. Thanks for all of your help. VERY helpful. __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

03-07-2005, 08:14 PM	#11
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Found you one in Napa, Ca. The guy must be on drugs though. $31.68 for one. I just bought some more for $2.00 each. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.