![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2004
Location: Canal Winchester, OH
Posts: 143
|
Lower control arm alignment
I recently reinstalled my lower control arms. When I measure from the front of the crossmember to the front end of the shaft grease fitting, the drivers side is 1/4 inch longer than the passenger side. When I installed the shafts, I centered them within the control arm and I looked underneath to make sure that the small short rod in the crossmember is in the whole in the shafts.
Is this a problem? Should I address this now or should I wait to see if the alignment shop has problems? Thanks for you help in advance. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|