supertrac bar kit or adj. panhard bar.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boraxman · 03-08-2005, 05:25 PM

on a 5" coil rear drop?, '70 C-10.

XXL · 03-08-2005, 05:34 PM

Quote:

Originally Posted by boraxman

on a 5" coil rear drop?, '70 C-10.

For coil drop, either will work. Since the suspension isn't making drastic height changes like on an air bag system, once you dial in the setting, you're pretty much set.

UP GRADE · 03-09-2005, 12:37 PM

will a adj. panhand bar work with a 6 inch coil drop.

Frank_Zeller · 03-09-2005, 04:37 PM

If you only do the panhand bar the mount point will be to high on the rearend. This may cause the rear to go from side to side as it travels up and down. The ECE kit mounts the pivot point on the passengers side rearend mount.

XXL · 03-09-2005, 05:42 PM

Quote:

Originally Posted by Frank_Zeller

If you only do the panhand bar the mount point will be to high on the rearend. This may cause the rear to go from side to side as it travels up and down. The ECE kit mounts the pivot point on the passengers side rearend mount.

Except that coil ride height isn't too variable... maybe 3" of excursion/compression (unloaded) at best. So there's really not much side-to-side issue to speak of. Having said that, longer is always better (and I'm still talking Panhard bars).

SCOTI · 03-11-2005, 08:24 PM

Quote:

Originally Posted by XXL

.... longer is always better (and I'm still talking Panhard bars).

Sure you are

.

03-08-2005, 05:25 PM	#1
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	supertrac bar kit or adj. panhard bar.... on a 5" coil rear drop?, '70 C-10. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

03-09-2005, 04:37 PM	#4
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	If you only do the panhand bar the mount point will be to high on the rearend. This may cause the rear to go from side to side as it travels up and down. The ECE kit mounts the pivot point on the passengers side rearend mount. __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-09-2005, 12:37 PM	#3
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	will a adj. panhand bar work with a 6 inch coil drop.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.