LMC Bed Rail Caps? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 03-12-2005, 09:31 PM

Has any one purchased the LMC bed rail caps that are featured in their catalog? They have them pictured in smooth or diamond plate style. Anyone know who makes them for LMC? Would like to know how they fit around the rear stake pocket by the tail gate since the bed rail "flares" at that point. Anyone have pictures of such? Seems as if LMC is the only who has them but I've never seen a 67-72 truck with them mounted. Like to see what they look like before I plunk down the $$$. Any one with a set care to comment about fit, quality, etc. Interested in the diamond plate style mostly. Thanks for all comments.

70c10 · 03-12-2005, 11:21 PM

My dad has them on his 70'. I checked for a long time on the net and could not find them made for our trucks other than LMC. He bought these last spring and we installed them this past fall after the truck was painted. They really set the textured bedliner off nicely. There is a very slight gap on the rear stake pockets. It's not too noticeable. The overall fitment is pretty good. These pics show all 4 pieces. I hope this helps.

**Ironhorse** · 03-13-2005, 10:33 AM

Jim, Thanks for the reply and the pics. Very nice looking truck, really clean. At the rear stake pocket you mentioned a slight gap. Would it be possible to take a pic of that specific area and post it? My plan is after installing the diamond tread caps is to install stake pocket tie downs and am interested if there are any issues to deal with in that area.

70c10 · 03-13-2005, 10:58 AM

I'll go down my dad's one day this week after work and take a pic for you. Thanks for the compliments!

**Ironhorse** · 03-13-2005, 03:57 PM

Jim, Thanks for the reply, will be looking forward to seeing the pic of the rear stake pocket and bed cap. Keep On Truckin'

GMC AMI · 03-13-2005, 09:01 PM

I think it was Dean's Truck that had Dodge ones that fit Darn good. I do not know the year. Maybe someone here will know? I used 73 chevy for the front and back, even the full gate cover by DEE ZEE fit but not the sides.

**Ironhorse** · 03-13-2005, 09:31 PM

Mike, I had bought a set of the Dodge rail caps and tried them. They do not cover the stake pocket at the tailgate area as the Dodge top rails are straight and do not flare like the 67-72 bed rails. I never actually installed them but as they were a special order, non-stock item I could not return them. Still have them and still in the box. Not sure what to do with them except find a Dodge truck owner, LOL. I did use the '73 Chevy diamond plate tailgate cover and with a little bit of massaging of the cap if fits rather well on the 'gate. Looking forward to seeing pics of an actual application.

**Tim Christian** · 03-13-2005, 11:15 PM

I have a brand new set for a short wheel base that is slightly bent on one end $50.00 + shipping

03-12-2005, 09:31 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,303	LMC Bed Rail Caps? Has any one purchased the LMC bed rail caps that are featured in their catalog? They have them pictured in smooth or diamond plate style. Anyone know who makes them for LMC? Would like to know how they fit around the rear stake pocket by the tail gate since the bed rail "flares" at that point. Anyone have pictures of such? Seems as if LMC is the only who has them but I've never seen a 67-72 truck with them mounted. Like to see what they look like before I plunk down the $$$. Any one with a set care to comment about fit, quality, etc. Interested in the diamond plate style mostly. Thanks for all comments. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-12-2005, 11:21 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	My dad has them on his 70'. I checked for a long time on the net and could not find them made for our trucks other than LMC. He bought these last spring and we installed them this past fall after the truck was painted. They really set the textured bedliner off nicely. There is a very slight gap on the rear stake pockets. It's not too noticeable. The overall fitment is pretty good. These pics show all 4 pieces. I hope this helps. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-13-2005, 10:33 AM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,303	Jim, Thanks for the reply and the pics. Very nice looking truck, really clean. At the rear stake pocket you mentioned a slight gap. Would it be possible to take a pic of that specific area and post it? My plan is after installing the diamond tread caps is to install stake pocket tie downs and am interested if there are any issues to deal with in that area. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-13-2005, 10:58 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I'll go down my dad's one day this week after work and take a pic for you. Thanks for the compliments! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-13-2005, 03:57 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,303	Jim, Thanks for the reply, will be looking forward to seeing the pic of the rear stake pocket and bed cap. Keep On Truckin' __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-13-2005, 09:01 PM	#6
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Dodge Truck ones fit. I think it was Dean's Truck that had Dodge ones that fit Darn good. I do not know the year. Maybe someone here will know? I used 73 chevy for the front and back, even the full gate cover by DEE ZEE fit but not the sides. Attached Images __________________ 1968 Chevy 4x4 307 4 speed Last edited by GMC AMI; 03-13-2005 at 09:04 PM.

03-13-2005, 09:31 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,303	Mike, I had bought a set of the Dodge rail caps and tried them. They do not cover the stake pocket at the tailgate area as the Dodge top rails are straight and do not flare like the 67-72 bed rails. I never actually installed them but as they were a special order, non-stock item I could not return them. Still have them and still in the box. Not sure what to do with them except find a Dodge truck owner, LOL. I did use the '73 Chevy diamond plate tailgate cover and with a little bit of massaging of the cap if fits rather well on the 'gate. Looking forward to seeing pics of an actual application. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

03-13-2005, 11:15 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a brand new set for a short wheel base that is slightly bent on one end $50.00 + shipping

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.