|
|
|
04-10-2005, 10:26 PM
|
#1 |
|
Registered User
Join Date: Mar 2005
Posts: 5
|
73-77 IFS swap
I have a 77 half ton chevy frame and running gear. Would it be a farily simple install to put the IFS of that frame onto my 55? I think I heard somewhere that it was almost a bolt in set up but I am not sure.
|
|
|
|
04-11-2005, 02:57 PM
|
#2 |
|
Clunker Farm, Proprietor
Join Date: Oct 2003
Location: Coastal Northern California
Posts: 124
|
It might be just as easy to swap to the '77 frame. I have a short '73 under my '58 body. The cab mounts line-up (requires a spacer) but you have to move the rear spring hangers forward to line-up the rear axle with the fender openings.
Have a look... It's sitting kinda tall out front but it'll drop right down with a motor and tranny in place. I've actually been thinkin' of putting that body BACK on a '58 31 frame.
__________________
Drew Chief Junk Jockey Last edited by Norselander; 04-11-2005 at 02:58 PM. |
|
|
|
|
04-11-2005, 09:51 PM
|
#3 |
|
Registered User
Join Date: Mar 2005
Posts: 5
|
Thanks for your help.
|
|
|
|
|
04-14-2005, 10:54 AM
|
#4 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Its almost a bolt in for a 55 1st. But it takes narrowing the front frame rails to get it into a 55 2nd -59. I did it in my 58 and its a lot of work. But you do end up with a truck front end in your truck.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
