Wanted Interior pics and door panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 04-23-2005, 12:00 AM

Does anyone have a picture of a 1977 Chevy interior with factory bucket seats . I am not looking for custom interior pics ,just factory . Also ,does anyone have a pair of factory wood grained door panels for sale .I would like a VERY Very nice set in Blue .Send pics to frankm@tconline.net . I also need a woodgrain dash panel .I just need the woodgrain part to glue on my panel . I dont mind paying for the right parts .Frank

**N2TRUX** · 04-23-2005, 12:48 AM

I'll show you what I have Frank. It's not exactly what you are looking for but it's pretty close.

The first pics has the early style seats. The last two are 77 style seats...

**N2TRUX** · 04-23-2005, 12:56 AM

If you can find decent door panels don't worry about the color. Quit a few of them were dyed from the factory. I found a really nice set that was maroon on the front. When I looked at the back, they were blue.

I spent about 30-40 minutes with lacquer thinner and stripped all the old vinyl dye off. No they look like new after a fresh coat of vinyl dye....

**N2TRUX** · 04-23-2005, 12:59 AM

I converted mine to power windows. Don't worry if you find manual window panels. They can be made to work. If you can find a complete power window/lock harness with the rubber boots it will make the conversion go faster and look like factory....

f.monroe · 04-23-2005, 09:17 AM

Ken ,
Thanks for taking the time to post the pics . The panels in the last picture is what I am looking for . Thanks also for the cleaning and dying info .That will make finding the panels a lot easier since thay dont need to be blue .
Frank

f.monroe · 04-25-2005, 06:27 PM

I need a pair of those in any color .Anyone have any for sale ? Frank

matthufham · 04-25-2005, 07:46 PM

if you don't mind me asking, in the blue interior at the top, above the driver seat near the rear window, there's some sort of switch. what is that? i don't have one in my truck.

f.monroe · 04-25-2005, 10:03 PM

That would be for the Cargo light . Frank

77C10step · 04-26-2005, 02:04 PM

I p[urchased the door panels for my truck some time back and also go the plastic door handle cups and the chrome trim bezels that surround the cups. I am confused though as to how to install them? The trim rings have four posts that stick out and look like they would sit in grooves on the cups, but do you drill into the panels and then glue them?

f.monroe · 05-17-2005, 11:45 PM

I found these on ebay .

http://cgi.ebay.com/ebaymotors/ws/eB...category=33696

Has anyone used these and how do they compare to the originals ? I would love to find a pair of real nice originals but these look very close and are only around $200 delivered . I bought a pair from another board member and will see what condition they are in when I get them . They might be useable .If not I will use them for parts and might consider a pair of these . Let me know what you guys think . Frank

04-23-2005, 12:00 AM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Wanted Interior pics and door panels Does anyone have a picture of a 1977 Chevy interior with factory bucket seats . I am not looking for custom interior pics ,just factory . Also ,does anyone have a pair of factory wood grained door panels for sale .I would like a VERY Very nice set in Blue .Send pics to frankm@tconline.net . I also need a woodgrain dash panel .I just need the woodgrain part to glue on my panel . I dont mind paying for the right parts .Frank

04-23-2005, 12:48 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	I'll show you what I have Frank. It's not exactly what you are looking for but it's pretty close. The first pics has the early style seats. The last two are 77 style seats... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 04-23-2005 at 12:50 AM.

04-23-2005, 12:56 AM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	If you can find decent door panels don't worry about the color. Quit a few of them were dyed from the factory. I found a really nice set that was maroon on the front. When I looked at the back, they were blue. I spent about 30-40 minutes with lacquer thinner and stripped all the old vinyl dye off. No they look like new after a fresh coat of vinyl dye.... Attached Images Last edited by N2TRUX; 04-23-2005 at 12:56 AM.

04-23-2005, 12:59 AM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	I converted mine to power windows. Don't worry if you find manual window panels. They can be made to work. If you can find a complete power window/lock harness with the rubber boots it will make the conversion go faster and look like factory.... Attached Images

04-23-2005, 09:17 AM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Pics Ken , Thanks for taking the time to post the pics . The panels in the last picture is what I am looking for . Thanks also for the cleaning and dying info .That will make finding the panels a lot easier since thay dont need to be blue . Frank

04-25-2005, 06:27 PM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I need a pair of those in any color .Anyone have any for sale ? Frank

04-25-2005, 07:46 PM	#7
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	if you don't mind me asking, in the blue interior at the top, above the driver seat near the rear window, there's some sort of switch. what is that? i don't have one in my truck.

04-25-2005, 10:03 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	That would be for the Cargo light . Frank

04-26-2005, 02:04 PM	#9
77C10step Registered User Join Date: Apr 2005 Posts: 14	Door Panel Pieces I p[urchased the door panels for my truck some time back and also go the plastic door handle cups and the chrome trim bezels that surround the cups. I am confused though as to how to install them? The trim rings have four posts that stick out and look like they would sit in grooves on the cups, but do you drill into the panels and then glue them?

05-17-2005, 11:45 PM	#10
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I found these on ebay . http://cgi.ebay.com/ebaymotors/ws/eB...category=33696 Has anyone used these and how do they compare to the originals ? I would love to find a pair of real nice originals but these look very close and are only around $200 delivered . I bought a pair from another board member and will see what condition they are in when I get them . They might be useable .If not I will use them for parts and might consider a pair of these . Let me know what you guys think . Frank

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.