FS....Holley throttle body and intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kevin45 · 07-29-2005, 04:08 AM

I have a Holley Throttle Body and Holley ProJection intake I am looking to part with all due to the fact it is not compatable with my '93. It is for '87, '88, '89 only. LMC list the throttle body at almost $700 alone and the intake around $300. Both are in excellent shape. The throttle body is 670cfm w/2" bores and will only work with the intake that will accept that. I do not want to seperate. The intake is aluminum but has been painted aluminum silver to clean it up. It also comes with a new EGR (I paid $60 for this) and an Edelbrock EGR relocator (which was necessary to clear the throttle body and cost around $70) I will let everything go for $500. But like I stated it will only fit those three years. It states that in the LMC catalog and also Jegs will tell you the same thing. I will try and post some pics this afternoon.

JonnyTechMech · 08-02-2005, 09:18 AM

Hey Kevin45, how about those pics? Also what's your shipping cost to Zip 75071?

Kevin45 · 08-02-2005, 03:43 PM

Sorry about the pics. I totally forgot. I will do it now and post it a little later this evening. I promise. I have just been so busy this last 2 weeks it completely slipped my mind.

Kevin

Kevin45 · 08-02-2005, 04:27 PM

Here are the pics I promised. Also shipping to 75071 would be approx. $25.

Kevin

JonnyTechMech · 08-04-2005, 09:17 AM

Thanks for taken time out to post your pics. I’m studying on this and trying to figure out how to rob Peter, to pay for it all, since you're not Paul!!!!

Don’t think this intake will work on the Vortec heads I have in mind. Those heads have a 4-bolt mount and the angle may not be just right. But if I don't take you up on it, I'm sure some with some bank will. Hope this encourages a sell and someone get one step closer to that dream.

*1FaastC10* · 08-05-2005, 06:43 PM

no, that intake wont work with Vortec heads. not only are the bolt angles different, but the ports dont even line up properly.

07-29-2005, 04:08 AM	#1
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	FS....Holley throttle body and intake I have a Holley Throttle Body and Holley ProJection intake I am looking to part with all due to the fact it is not compatable with my '93. It is for '87, '88, '89 only. LMC list the throttle body at almost $700 alone and the intake around $300. Both are in excellent shape. The throttle body is 670cfm w/2" bores and will only work with the intake that will accept that. I do not want to seperate. The intake is aluminum but has been painted aluminum silver to clean it up. It also comes with a new EGR (I paid $60 for this) and an Edelbrock EGR relocator (which was necessary to clear the throttle body and cost around $70) I will let everything go for $500. But like I stated it will only fit those three years. It states that in the LMC catalog and also Jegs will tell you the same thing. I will try and post some pics this afternoon. __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!! Last edited by Kevin45; 07-29-2005 at 04:09 AM.

08-02-2005, 09:18 AM	#2
JonnyTechMech STOP! Hamma time!!! Join Date: Feb 2005 Location: Dallas TX. Posts: 145	Hey Kevin45, how about those pics? Also what's your shipping cost to Zip 75071? __________________ Plan your work and work your plan!!!, or pitty da fool!! 87 GMC BaseTrim, 305 under the wrench/TH400/ 92 Chevy 1500, 350,TH700R4 sittin on dubs

08-02-2005, 03:43 PM	#3
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Sorry about the pics. I totally forgot. I will do it now and post it a little later this evening. I promise. I have just been so busy this last 2 weeks it completely slipped my mind. Kevin __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!!

08-02-2005, 04:27 PM	#4
Kevin45 Registered User Join Date: Oct 2004 Location: Urbana, Ohio Posts: 591	Here are the pics I promised. Also shipping to 75071 would be approx. $25. Kevin Attached Images __________________ '93 Silverado Reg. Cab Shortbox .060 over 350 Quick and fun!!! Last edited by Kevin45; 08-02-2005 at 04:40 PM.

08-04-2005, 09:17 AM	#5
JonnyTechMech STOP! Hamma time!!! Join Date: Feb 2005 Location: Dallas TX. Posts: 145	Thanks for taken time out to post your pics. I’m studying on this and trying to figure out how to rob Peter, to pay for it all, since you're not Paul!!!! Don’t think this intake will work on the Vortec heads I have in mind. Those heads have a 4-bolt mount and the angle may not be just right. But if I don't take you up on it, I'm sure some with some bank will. Hope this encourages a sell and someone get one step closer to that dream. __________________ Plan your work and work your plan!!!, or pitty da fool!! 87 GMC BaseTrim, 305 under the wrench/TH400/ 92 Chevy 1500, 350,TH700R4 sittin on dubs

08-05-2005, 06:43 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	no, that intake wont work with Vortec heads. not only are the bolt angles different, but the ports dont even line up properly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.