'69-'70 Cheyenne 4x4 question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyboy1962 · 08-08-2005, 01:43 AM

Hi Guys,
About a week ago I was at a hardware store here in town, and when I went to walk outside I saw this sweet looking '69-'70 Cheyenne 10 swb 4x4 with a 8 inch lift.

It had some real meaty swampers with aluminum mags, but still in primer. It appeared to be finished besides needing to be painted.

It was one of those vehicles that I just had to give it real good look over.

Was only the K5's (blazers) had badges only showing it was a 4x4, or did also the trucks & 'burbs/panels have badges showing they were also 4x4's?

TIA,
David

sameyrasmea72 · 08-08-2005, 02:08 AM

I think all 4X4's had the badges. But if it was a cheyenne, it would of had to been a 71 or 72.

**JIMs70GMC** · 08-08-2005, 05:57 AM

Only the blazers got the "K" on a badge and that was 2wd and 4wd. My GMC has a "4x4" emblem.

Bishops Trucks · 08-08-2005, 09:28 AM

I have a '71 Cheyenne Super 4x4 swb. It has the engine size badge. My other '71 K/20 4x4 lwb has the 4x4 badge.

1969 GMC · 08-08-2005, 04:01 PM

My '69 GMC doesn't have engine size or 4 wheel drive emblems. just the GMC 2500 V-Eight in front of the door.

Chevyboy1962 · 08-08-2005, 11:41 PM

Thanks for the replies.

So only the '71-'72 trucks were the only years that had the Cheyenne 4x4?

Can a '69-'70 grille bolt right up to the '71-'72 front fenders?

Thanks again,
David

**special-K** · 08-09-2005, 08:02 AM

Yes,the grilles are interchangable as well as the emblems.GMCs didn`t use the engine badges.Chevy used the "All Wheel Drive" badges in 69/70.They were located under the side marker light on the front fender and the optional engine badge under the model badge.In 71/72,no "All Wheel Drive" badge,optional engine badge under side marker light on front fender.

08-08-2005, 01:43 AM	#1
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	'69-'70 Cheyenne 4x4 question Hi Guys, About a week ago I was at a hardware store here in town, and when I went to walk outside I saw this sweet looking '69-'70 Cheyenne 10 swb 4x4 with a 8 inch lift. It had some real meaty swampers with aluminum mags, but still in primer. It appeared to be finished besides needing to be painted. It was one of those vehicles that I just had to give it real good look over. Was only the K5's (blazers) had badges only showing it was a 4x4, or did also the trucks & 'burbs/panels have badges showing they were also 4x4's? TIA, David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser *1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project

08-08-2005, 02:08 AM	#2
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	I think all 4X4's had the badges. But if it was a cheyenne, it would of had to been a 71 or 72. __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

08-08-2005, 05:57 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Only the blazers got the "K" on a badge and that was 2wd and 4wd. My GMC has a "4x4" emblem. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

08-08-2005, 09:28 AM	#4
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	I have a '71 Cheyenne Super 4x4 swb. It has the engine size badge. My other '71 K/20 4x4 lwb has the 4x4 badge. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

08-08-2005, 04:01 PM	#5
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	My '69 GMC doesn't have engine size or 4 wheel drive emblems. just the GMC 2500 V-Eight in front of the door. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

08-08-2005, 11:41 PM	#6
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	Thanks for the replies. So only the '71-'72 trucks were the only years that had the Cheyenne 4x4? Can a '69-'70 grille bolt right up to the '71-'72 front fenders? Thanks again, David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser *1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project

08-09-2005, 08:02 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Yes,the grilles are interchangable as well as the emblems.GMCs didn`t use the engine badges.Chevy used the "All Wheel Drive" badges in 69/70.They were located under the side marker light on the front fender and the optional engine badge under the model badge.In 71/72,no "All Wheel Drive" badge,optional engine badge under side marker light on front fender. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.