FS: Dynomax "Blackjack" Headers - Never Used - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DirtyBurb86 · 08-18-2005, 07:29 AM

For Sale:

Dynomax “Blackjack” headers – PN 85503. I bought these for the ‘Burb but never got to put them on. These headers are great for us Cali boys and everyone else who has to worry about SMOG, because they have AIR injection fittings (it’s difficult to find headers w/ built in AIR ports). These headers will fit various GMCs and Chevies from ’66 to ‘91 with engines ranging from 283-400. The exact fitment list and pictures are below:

Fitment:

½, & ¾ Ton Pickups from’66 to ’72 w/ 283-400 engines (2wd or 4wd)
½, ¾, & 1 Ton Pickups from’73 to ’87 w/ 350-400 engines (2wd or 4wd)
1 Ton Crewcabs from’88 to ’91 w/ 350-400 engines (2wd or 4wd)
Blazer or Jimmy from ’69 to ’72 w/ 283-400 engines (4wd)
Blazer or Jimmy from ’67 to ’87 w/ 350-400 engines (2wd)
Blazer or Jimmy from ’73 to ’91 w/ 350-400 engines (4wd)
Suburban from ’66 to ’72 w/ 283-400 engines (4wd)
Suburban from ’73 to ’91 w/ 350-400 engines (2wd of 4wd)

Also, definitely check out the following link to Dynomax’s website to see any fitment requirements (i.e. need for different A/C bracket, etc.) for your specific application…

http://www.dynomax.com/documents/standard_details.pdf

Pics:

VERY HIGH RESOLUTION (56K Warning)
PM me if you need smaller pics.

Pic 1

Pic 2

Pic 3

Pic 4

Pic 5

Pics of chipped paint:

Pic 6

Pic 7

Pic 8

Pic 9

Pic 10

Pic 11

Pic 12

Pic 13

Pic 14

Shipping:

As pictured, the original cardboard box is pretty greasy and beat up. Consequently, I will ship the headers in a different container if you wish. For your shipping calculations, the ZIP of origination is 92543 and the package dimensions are 9" x 7" x 35" at 28 pounds. Local pickup in Hemet, Ca is also welcomed.

Price:

I’m asking $75.00 plus the ride.

kevinr1970 · 08-18-2005, 11:36 AM

Sent you a PM

jfrank133 · 08-19-2005, 02:53 PM

where are the pics

sixty8c10 · 08-21-2005, 09:08 PM

pics please

DirtyBurb86 · 08-27-2005, 02:03 PM

I'm very sorry to all for my HUGE delay. I've been away for a while due to some circumstances, but I'm back in full effect. The pics are up for anyone who is still interested. As pictured, they're in good condition with the exception of some paint chips here and there. All paperwork, gaskets collectors and hardware pictured are also included. Kevin1970 - I'll be sending you a PM shortly w/ the requested info and you'll have first dibbs if you're still interested since yours was the first PM received. Once again, I apologize for posting the item and then falling off the face of the earth for a week. Believe me - I'm not a flake like that.

-Shawn

79Silv4x4 · 08-27-2005, 05:59 PM

I'll take 'em. Going out for the evening but will contact you Sunday and arrange payment and shipping.

kevinr1970 · 08-28-2005, 01:59 PM

Quote:

Originally Posted by DirtyBurb86

Kevin1970 - I'll be sending you a PM shortly w/ the requested info and you'll have first dibbs if you're still interested since yours was the first PM received.

I was out of town yesterday so I didn't see this.
I haven't recieved the PM but I want them. I used 36" x 12" x 24" and 25lbs shipped to 98275 to estimate and UPS shipping was ~$18.
If you wanted to enter actual dimensions and weight to be more accurate then let me know.
As long as the box is still able to be shipped in then it should be fine.
How do you want the $$, check, MO, paypal?

DirtyBurb86 · 08-29-2005, 03:37 PM

Kevin1970 -
The dimensions were 9" x 17" x 35" @ 28 lbs. I prefer to ship DHL, which will be $14. As for payment, I'd like to do the transaction via a BIN eBay auction and receive corresponding payment via PayPal. If you don't do the eBay thing we can just skip that step. Let me know how you'd like to proceed.

-Shawn

DirtyBurb86 · 08-31-2005, 03:43 AM

HEADERS STILL AVAILABLE!!!

Kevinr1970 discovered that these weren't going to work for his application, so the headers are back up for grabs. As previously stated, the shipping dimensions are 9" x 7" x 35" at 28 pounds from ZIP 92220. If you would like to purchase, here's a link to the eBay auction that I previously set up for Kevinr1970...

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7996759875

-Shawn

89onetonsub · 09-09-2005, 10:37 PM

Do you still have these?

08-18-2005, 07:29 AM	#1
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	FS: Dynomax "Blackjack" Headers - STILL AVAILABLE! For Sale: Dynomax “Blackjack” headers – PN 85503. I bought these for the ‘Burb but never got to put them on. These headers are great for us Cali boys and everyone else who has to worry about SMOG, because they have AIR injection fittings (it’s difficult to find headers w/ built in AIR ports). These headers will fit various GMCs and Chevies from ’66 to ‘91 with engines ranging from 283-400. The exact fitment list and pictures are below: Fitment: ½, & ¾ Ton Pickups from’66 to ’72 w/ 283-400 engines (2wd or 4wd) ½, ¾, & 1 Ton Pickups from’73 to ’87 w/ 350-400 engines (2wd or 4wd) 1 Ton Crewcabs from’88 to ’91 w/ 350-400 engines (2wd or 4wd) Blazer or Jimmy from ’69 to ’72 w/ 283-400 engines (4wd) Blazer or Jimmy from ’67 to ’87 w/ 350-400 engines (2wd) Blazer or Jimmy from ’73 to ’91 w/ 350-400 engines (4wd) Suburban from ’66 to ’72 w/ 283-400 engines (4wd) Suburban from ’73 to ’91 w/ 350-400 engines (2wd of 4wd) Also, definitely check out the following link to Dynomax’s website to see any fitment requirements (i.e. need for different A/C bracket, etc.) for your specific application… http://www.dynomax.com/documents/standard_details.pdf Pics: VERY HIGH RESOLUTION (56K Warning) PM me if you need smaller pics. Pic 1 Pic 2 Pic 3 Pic 4 Pic 5 Pics of chipped paint: Pic 6 Pic 7 Pic 8 Pic 9 Pic 10 Pic 11 Pic 12 Pic 13 Pic 14 Shipping: As pictured, the original cardboard box is pretty greasy and beat up. Consequently, I will ship the headers in a different container if you wish. For your shipping calculations, the ZIP of origination is 92543 and the package dimensions are 9" x 7" x 35" at 28 pounds. Local pickup in Hemet, Ca is also welcomed. Price: I’m asking $75.00 plus the ride. __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock Last edited by DirtyBurb86; 08-31-2005 at 04:41 PM.

08-18-2005, 11:36 AM	#2
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Sent you a PM __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

08-21-2005, 09:08 PM	#4
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	pics please __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

08-27-2005, 02:03 PM	#5
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	I'm very sorry to all for my HUGE delay. I've been away for a while due to some circumstances, but I'm back in full effect. The pics are up for anyone who is still interested. As pictured, they're in good condition with the exception of some paint chips here and there. All paperwork, gaskets collectors and hardware pictured are also included. Kevin1970 - I'll be sending you a PM shortly w/ the requested info and you'll have first dibbs if you're still interested since yours was the first PM received. Once again, I apologize for posting the item and then falling off the face of the earth for a week. Believe me - I'm not a flake like that. -Shawn __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock

08-29-2005, 03:37 PM	#8
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	Kevin1970 - The dimensions were 9" x 17" x 35" @ 28 lbs. I prefer to ship DHL, which will be $14. As for payment, I'd like to do the transaction via a BIN eBay auction and receive corresponding payment via PayPal. If you don't do the eBay thing we can just skip that step. Let me know how you'd like to proceed. -Shawn __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock Last edited by DirtyBurb86; 08-29-2005 at 03:37 PM.

08-19-2005, 02:53 PM	#3
jfrank133 AUSTIN TX Join Date: Sep 2004 Location: Austin, Texas Posts: 135	where are the pics

08-27-2005, 05:59 PM	#6
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	I'll take 'em. Going out for the evening but will contact you Sunday and arrange payment and shipping.

08-31-2005, 03:43 AM	#9
DirtyBurb86 Narcissistic Prick Join Date: Dec 2004 Location: So Cal Posts: 87	HEADERS STILL AVAILABLE!!! Kevinr1970 discovered that these weren't going to work for his application, so the headers are back up for grabs. As previously stated, the shipping dimensions are 9" x 7" x 35" at 28 pounds from ZIP 92220. If you would like to purchase, here's a link to the eBay auction that I previously set up for Kevinr1970... http://cgi.ebay.com/ebaymotors/ws/eB...tem=7996759875 -Shawn __________________ '86 GMC Suburban K2500, 3/4, 4x4, 350/400, 4" susp lift, 35" BFG M/Ts '96 Oldsmobile Aurora, Pure Luxury!!! '03 Mazda6 Sport, V6, 240hp Dead Stock

09-09-2005, 10:37 PM	#10
89onetonsub Registered User Join Date: Jun 2005 Location: Lancaster CA Posts: 10	Do you still have these?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.