Need help w/GM part number - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 08-19-2005, 10:32 PM

I have a fan shroud that I don't know what application it will fit.
Can anyone tell me how to find the application via the part number 3892006?

Any help would be really appreciated.

Thanks.

Slonaker · 08-20-2005, 12:21 AM

I checked www.gmpartsdirect.com, but they had no part by that number.

Slonaker

**ScottH** · 08-20-2005, 09:52 AM

Thanks, I tried that as well, same result. I also tried http://www.automobilearchives.com/part_number.asp and the number comes up as a fan shroud, but u have to pay $ to find out the application.

**Captkaos** · 08-22-2005, 10:57 AM

Call the dealership and ask them.

dswancutt · 08-22-2005, 11:40 AM

Do you know if it is off a truck? I can check my parts manuals up through 85 and try to find it's application.

Doug

**ScottH** · 08-22-2005, 11:53 AM

I was told it fit a "70's" big block truck. I know that it is not 67 - 72 for sure, and does not fit my 76 bb C10. I suspect it may be for other bb trucks or mid 70's sbc trucks but not sure.

Thanks for any info.

Scott

bigblock73 · 08-22-2005, 12:35 PM

Is it a one piece thin one? If so, then it should fit 73-80. I believe the 81+ trucks went to two-piece shrouds. LMC catalogs have some pretty good illustrations, maybe check there.

Pics help too.

**ScottH** · 08-22-2005, 02:02 PM

Yup, checked the catalogs and it's hard to tell from the illustrations but looks like it fits the 73 and up sbc. It definitely is not the thin bb style which is what I have on my 76. It is a bit wider, one piece, and mounting holes are not recessed like the bb.

Thanks again to all.

dswancutt · 08-22-2005, 06:41 PM

I checked all my manuals, a Mitchell book and could not find that number. Sorry I couldn't be more help.

Doug

08-19-2005, 10:32 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Need help w/GM part number I have a fan shroud that I don't know what application it will fit. Can anyone tell me how to find the application via the part number 3892006? Any help would be really appreciated. Thanks.

08-20-2005, 12:21 AM	#2
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	I checked www.gmpartsdirect.com, but they had no part by that number. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

08-22-2005, 10:57 AM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Call the dealership and ask them. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-22-2005, 12:35 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Is it a one piece thin one? If so, then it should fit 73-80. I believe the 81+ trucks went to two-piece shrouds. LMC catalogs have some pretty good illustrations, maybe check there. Pics help too. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 08-22-2005 at 12:35 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-20-2005, 09:52 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Thanks, I tried that as well, same result. I also tried http://www.automobilearchives.com/part_number.asp and the number comes up as a fan shroud, but u have to pay $ to find out the application.

08-22-2005, 11:40 AM	#5
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	Do you know if it is off a truck? I can check my parts manuals up through 85 and try to find it's application. Doug

08-22-2005, 11:53 AM	#6
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	I was told it fit a "70's" big block truck. I know that it is not 67 - 72 for sure, and does not fit my 76 bb C10. I suspect it may be for other bb trucks or mid 70's sbc trucks but not sure. Thanks for any info. Scott

08-22-2005, 02:02 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Yup, checked the catalogs and it's hard to tell from the illustrations but looks like it fits the 73 and up sbc. It definitely is not the thin bb style which is what I have on my 76. It is a bit wider, one piece, and mounting holes are not recessed like the bb. Thanks again to all.

08-22-2005, 06:41 PM	#9
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	I checked all my manuals, a Mitchell book and could not find that number. Sorry I couldn't be more help. Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.