Parting 72 blazer chassis - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 08-24-2005, 09:38 PM

I will be taking it to the scrap yard next week. Axles (3.08) disc ft $100/pr. The frame had some pieces chopped off of it, but what's left is fairly solid. Let me know if anyone needs mounts, springs, etc. Brian

Huck · 08-24-2005, 09:43 PM

Need 72 blazer rear bumper dust shields---got any?

Burnsman · 08-24-2005, 09:46 PM

Huck, nothing there. Sorry. Brian

badpeanut · 08-25-2005, 12:03 AM

Any chance the rear axle is a posi?

gregbr · 08-25-2005, 04:06 AM

Are the front springs factory original & not sagging? I could also use the front spring frame mounts (ends near front bumper). I assume they are the same for a truck. Let me know a total to 29730. Greg

vtblazer · 08-25-2005, 06:34 AM

Are you willing to ship the axels?
4x4, right?

Burnsman · 08-25-2005, 07:55 AM

The rear is not a posi. I'll take a pic of the springs and mounts (they were in decent shape). vt, anything for you bud. I can put them on a pallet and ship them from my shop, or you can take them back with you when you drop off the suburban.

vtblazer · 08-25-2005, 08:15 AM

Have any idea of a total shipped? 05663 Thanks

If your interested in the burb, lets talk.

Burnsman · 08-25-2005, 08:44 AM

Kurt, I'll see if I can get you a ballpark number today.

gregbr · 08-26-2005, 03:22 AM

I'm interested in the front springs. The front hangers look different than mine....on a 67 K10, from what I rememeber. I will check again. What's the total for the front springs and front hangers to 29730? I only need the front hangers on the front axle. Greg

Burnsman · 08-26-2005, 08:30 AM

Greg, how big of a hurry are you in? I'm going to take them off anyways. I need to get the rest to the scrap yard tomorrow (I'll cut off the front and rear portions of the frame). I'll then work on getting everything apart. I'd be able to get a much better shipping number if I have an actual weight. I could probably get you an answer early next week. Is that ok?

71HUGGER396 · 08-26-2005, 07:32 PM

Brian, I have a guy at work that needs the pass. side very rear spring hanger for a 1/2 ton long bed 4x4. Do you think this would be the same? If so, how much? Thanks, Rob.

Burnsman · 08-26-2005, 10:18 PM

Rob, I'll get it off and take a pic to make sure it's what he needs. I'm about 90 percent sure they are the same. It will be early next week.

DEFIANT NCC-74205 · 08-27-2005, 01:36 AM

Hi Brian. I Just Found This Site In The Past 24 Hrs. Just Literally Got Approved To Login. I Was Wondering If You Still Had The Header Piece That Goes Between The Two Front Windshield Pillars Since The Pics Showed Somewhat Of A Body Still On The Frame. I Am Trying To Repair A 69 Blazer From Rollover Damage, And That Is The Only Piece That I Have Not Been Able To Replace. If You Do Have It, I Would Be Willing To Come Get It. Just Let Me Know How Much You Want For It And Your Time To Cut It Off. Thanks So Much For Your Time. Jon

gregbr · 08-27-2005, 02:39 AM

Not in a hurry Burnsman, let me know when you can. The front hangers are a little different but will work. Greg

Burnsman · 08-27-2005, 07:43 AM

defiant, another board member wanted it too (he's coming for the top), but it was really bad. Almost rotted clear through. And welcome to the board! Brian

DEFIANT NCC-74205 · 08-27-2005, 12:07 PM

Darn, too late. Well thanks for the reply and the warm welcome, I'm sure another one will turn up.

Burnsman · 08-29-2005, 09:09 PM

Guys, I've been a little lax. I have the tub stripped and it's in the air ready for the frame parts to be dropped (on the trailer). Hopefully within a day or two. Sorry for the wait. Brian

71HUGGER396 · 08-29-2005, 10:52 PM

Brian, whenever you get the time, Rob

smbrouss70 · 09-01-2005, 12:47 AM

Quote:

Originally Posted by Burnsman

it was really bad. Almost rotted clear through.

Brian, the windshield frame was junk, huh? I kinda thought it might be with all that silicone on there. Are the sunvisors and the brackets that bolted to the frame still good? As of right now I'm still planning on leaving on the 10th or 11th of Sept. to come up there. I'll give a call before I leave.

Burnsman · 09-01-2005, 07:38 AM

Steven, visors are sitting here for you. I couldn't believe how bad it was. We must have had our beer goggles on. I could put my fist through in several spots. It was amazing. For the rest of the guys, I got everything off the frame last night, but it was late. I need to get it to the scrap yard tonight and have some other stuff to do. I'll get everything sorted out this weekend. Brian

seroadking · 09-07-2005, 02:18 PM

Brian ,, I,m Robs freind , looking for the rear pass. side leaf spring bracket that is rivited to the frame // I have a 71 4x4 1/2 ton // do you think it's the same ??
thanks rich

gregbr · 09-07-2005, 06:13 PM

Brian, send me a paypal address for the $100. Greg

seroadking · 09-08-2005, 12:55 AM

brian ,, thanks ,,, send me an address and a total and i'll send you a money order ( if thats ok ) ... seroadking@msn.com
thanks again ,, rich

seroadking · 09-15-2005, 08:01 PM

Brian ,, got the rear leaf spring hangers today ...
just what i needed ,, THANKS A TON !!!!!!!

08-24-2005, 09:38 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Parting 72 blazer chassis - Pa I will be taking it to the scrap yard next week. Axles (3.08) disc ft $100/pr. The frame had some pieces chopped off of it, but what's left is fairly solid. Let me know if anyone needs mounts, springs, etc. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-24-2005, 09:46 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	shields Huck, nothing there. Sorry. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-25-2005, 04:06 AM	#5
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Are the front springs factory original & not sagging? I could also use the front spring frame mounts (ends near front bumper). I assume they are the same for a truck. Let me know a total to 29730. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

08-25-2005, 07:55 AM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts The rear is not a posi. I'll take a pic of the springs and mounts (they were in decent shape). vt, anything for you bud. I can put them on a pallet and ship them from my shop, or you can take them back with you when you drop off the suburban. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-25-2005, 08:44 AM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	axles Kurt, I'll see if I can get you a ballpark number today. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-24-2005, 09:43 PM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Need 72 blazer rear bumper dust shields---got any?

08-25-2005, 12:03 AM	#4
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Any chance the rear axle is a posi?

08-25-2005, 06:34 AM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Are you willing to ship the axels? 4x4, right?

08-25-2005, 08:15 AM	#8
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Have any idea of a total shipped? 05663 Thanks If your interested in the burb, lets talk.

08-26-2005, 03:22 AM	#10
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	I'm interested in the front springs. The front hangers look different than mine....on a 67 K10, from what I rememeber. I will check again. What's the total for the front springs and front hangers to 29730? I only need the front hangers on the front axle. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

08-26-2005, 08:30 AM	#11
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	front parts Greg, how big of a hurry are you in? I'm going to take them off anyways. I need to get the rest to the scrap yard tomorrow (I'll cut off the front and rear portions of the frame). I'll then work on getting everything apart. I'd be able to get a much better shipping number if I have an actual weight. I could probably get you an answer early next week. Is that ok? __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-26-2005, 07:32 PM	#12
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Brian, I have a guy at work that needs the pass. side very rear spring hanger for a 1/2 ton long bed 4x4. Do you think this would be the same? If so, how much? Thanks, Rob. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

08-26-2005, 10:18 PM	#13
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	rear hanger Rob, I'll get it off and take a pic to make sure it's what he needs. I'm about 90 percent sure they are the same. It will be early next week. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-27-2005, 01:36 AM	#14
DEFIANT NCC-74205 Registered User Join Date: Aug 2005 Location: POCONO MTS PA Posts: 64	Hi Brian. I Just Found This Site In The Past 24 Hrs. Just Literally Got Approved To Login. I Was Wondering If You Still Had The Header Piece That Goes Between The Two Front Windshield Pillars Since The Pics Showed Somewhat Of A Body Still On The Frame. I Am Trying To Repair A 69 Blazer From Rollover Damage, And That Is The Only Piece That I Have Not Been Able To Replace. If You Do Have It, I Would Be Willing To Come Get It. Just Let Me Know How Much You Want For It And Your Time To Cut It Off. Thanks So Much For Your Time. Jon

08-27-2005, 02:39 AM	#15
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Not in a hurry Burnsman, let me know when you can. The front hangers are a little different but will work. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

08-27-2005, 07:43 AM	#16
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	blazer defiant, another board member wanted it too (he's coming for the top), but it was really bad. Almost rotted clear through. And welcome to the board! Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-27-2005, 12:07 PM	#17
DEFIANT NCC-74205 Registered User Join Date: Aug 2005 Location: POCONO MTS PA Posts: 64	HEADER Panel Darn, too late. Well thanks for the reply and the warm welcome, I'm sure another one will turn up.

08-29-2005, 09:09 PM	#18
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	blazer chassis Guys, I've been a little lax. I have the tub stripped and it's in the air ready for the frame parts to be dropped (on the trailer). Hopefully within a day or two. Sorry for the wait. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-29-2005, 10:52 PM	#19
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Brian, whenever you get the time, Rob __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

09-01-2005, 07:38 AM	#21
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	blazer Steven, visors are sitting here for you. I couldn't believe how bad it was. We must have had our beer goggles on. I could put my fist through in several spots. It was amazing. For the rest of the guys, I got everything off the frame last night, but it was late. I need to get it to the scrap yard tonight and have some other stuff to do. I'll get everything sorted out this weekend. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

09-07-2005, 02:18 PM	#22
seroadking Registered User Join Date: Aug 2005 Location: harmar , pa. Posts: 6	Brian ,, I,m Robs freind , looking for the rear pass. side leaf spring bracket that is rivited to the frame // I have a 71 4x4 1/2 ton // do you think it's the same ?? thanks rich Last edited by seroadking; 09-07-2005 at 02:19 PM.

09-07-2005, 06:13 PM	#23
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Brian, send me a paypal address for the $100. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

09-08-2005, 12:55 AM	#24
seroadking Registered User Join Date: Aug 2005 Location: harmar , pa. Posts: 6	brian ,, thanks ,,, send me an address and a total and i'll send you a money order ( if thats ok ) ... seroadking@msn.com thanks again ,, rich

09-15-2005, 08:01 PM	#25
seroadking Registered User Join Date: Aug 2005 Location: harmar , pa. Posts: 6	Brian ,, got the rear leaf spring hangers today ... just what i needed ,, THANKS A TON !!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.