WANTED: Cab in Pa/NJ area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy lover · 09-05-2005, 09:32 PM

I need a cab for my '82 GMC 4x4 w/sm465-205. My floor is beyond floor panels.

chevy lover · 09-07-2005, 12:43 AM

Ttt

norville · 09-07-2005, 12:59 AM

Did you try harry's u pull it or thepapershop.com?

bob

tgh117 · 09-07-2005, 12:12 PM

I will keep my eyes out, but you might want to check out the penny power. There has been a few parts in there from time to time. There is also a guy on here from Vera Cruz that did have some stuff. Toms 69 conv was his name I think, or something close to that. Here is the thread, you might want to contact him and see if he has anything left. http://67-72chevytrucks.com/vboard/s....php3?t=163208

chevy lover · 09-07-2005, 09:28 PM

thanks

Scotts91Blazer · 09-17-2005, 09:33 PM

I'm contemplating parting my 86 out, has solid floors, but cab corners have started to let go, the old guy I bought it from had steps mounted and drilled thru the corners and that's where it started to rust out, The steps were hiding the rust and before i realized it the corners were shot, but still salvagable. also some surface rust where he drilled thru the rockers for the steps, but nothing major. I'm over in easton,pa about a 1/2 hour from you. I'll know in the next week or so what I'm going to do with it. let me know if your interested.

chevy lover · 09-18-2005, 09:46 AM

just let me know if it can go and when I can take a look.

jc · 09-19-2005, 12:17 PM

i have an 84 complete swb truck the cab has 1 small rust spot in each corner.
im about 1 hr 40 min away.
truck is brown
i will part with cab for $300, comes with-- very solid vinal bench seat,
whole dash, visors, and auto non tilt nice wheel colum.

$75 extra for both doors one is very nice , passengerside is dented at lower front.

$550 for the bed swb very very nice no tailgate excellant floor and driverside
passengerside has a long narrow crease very shallow dent. i did not see any rust on the bed

frame is bent in front
$800 for whole truck minus driverside front fender
comes with 4 rallies

**crossy** · 09-19-2005, 02:32 PM

http://67-72chevytrucks.com/vboard/s...61#post1352761

http://67-72chevytrucks.com/vboard/s....php3?t=168133

jc · 09-19-2005, 09:05 PM

http://67-72chevytrucks.com/vboard/s....php3?t=173599

**crossy** · 11-28-2005, 10:39 AM

mike, did you ever get what you needed here?

chevy lover · 12-01-2005, 08:02 PM

Actually I did not but I found a good auto trans cab near me. good shape and only $200. The only thing I need now is that pesky high trans hump for a456/205 combo.

**crossy** · 12-01-2005, 11:27 PM

and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE

chevy lover · 12-03-2005, 12:14 PM

Quote:

Originally Posted by crossy

and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE

not to be a pain or anything but would you have a pick?

**crossy** · 12-03-2005, 01:37 PM

I knew that would get asked . the caulk that is still stuck on ,with red paint still on it, makes it look weird across the rear edge but tunnel is perfect, uncut shape..

chevy lover · 12-05-2005, 07:54 PM

Crossy, I sent you a pm

09-05-2005, 09:32 PM	#1
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	WANTED: Cab in Pa/NJ area I need a cab for my '82 GMC 4x4 w/sm465-205. My floor is beyond floor panels. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-07-2005, 12:43 AM	#2
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Ttt __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-07-2005, 12:59 AM	#3
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	Did you try harry's u pull it or thepapershop.com? bob __________________ 1986 C10 Scottsdale 5.3, TH400

09-07-2005, 12:12 PM	#4
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	I will keep my eyes out, but you might want to check out the penny power. There has been a few parts in there from time to time. There is also a guy on here from Vera Cruz that did have some stuff. Toms 69 conv was his name I think, or something close to that. Here is the thread, you might want to contact him and see if he has anything left. http://67-72chevytrucks.com/vboard/s....php3?t=163208 __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

09-07-2005, 09:28 PM	#5
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	thanks __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-17-2005, 09:33 PM	#6
Scotts91Blazer Registered User Join Date: Jun 2005 Location: Easton,Pa Posts: 26	I'm contemplating parting my 86 out, has solid floors, but cab corners have started to let go, the old guy I bought it from had steps mounted and drilled thru the corners and that's where it started to rust out, The steps were hiding the rust and before i realized it the corners were shot, but still salvagable. also some surface rust where he drilled thru the rockers for the steps, but nothing major. I'm over in easton,pa about a 1/2 hour from you. I'll know in the next week or so what I'm going to do with it. let me know if your interested. __________________ 91 Blazer 350 TBI 86 C10 305 bored .30 over LWB F/S 99 Mustang (my wife thinks I bought it for her) 02 Sentra (my wife's real car) 49 Ford F3 (not running, but a Rat-Rodders dream) 85 Yamaha XJ700 Maxim X

09-18-2005, 09:46 AM	#7
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	just let me know if it can go and when I can take a look. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

09-19-2005, 12:17 PM	#8
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	i have an 84 complete swb truck the cab has 1 small rust spot in each corner. im about 1 hr 40 min away. truck is brown i will part with cab for $300, comes with-- very solid vinal bench seat, whole dash, visors, and auto non tilt nice wheel colum. $75 extra for both doors one is very nice , passengerside is dented at lower front. $550 for the bed swb very very nice no tailgate excellant floor and driverside passengerside has a long narrow crease very shallow dent. i did not see any rust on the bed frame is bent in front $800 for whole truck minus driverside front fender comes with 4 rallies __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) Last edited by jc; 09-19-2005 at 12:21 PM.

09-19-2005, 02:32 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	http://67-72chevytrucks.com/vboard/s...61#post1352761 http://67-72chevytrucks.com/vboard/s....php3?t=168133 __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

09-19-2005, 09:05 PM	#10
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	http://67-72chevytrucks.com/vboard/s....php3?t=173599 __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

11-28-2005, 10:39 AM	#11
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area mike, did you ever get what you needed here? __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-01-2005, 08:02 PM	#12
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Re: WANTED: Cab in Pa/NJ area Actually I did not but I found a good auto trans cab near me. good shape and only $200. The only thing I need now is that pesky high trans hump for a456/205 combo. __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike

12-01-2005, 11:27 PM	#13
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area and guess who just happens to have one here in front of him that i was just making up the ad for ebay. nice condition. and I mean NICE! $35, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-03-2005, 01:37 PM	#15
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WANTED: Cab in Pa/NJ area I knew that would get asked . the caulk that is still stuck on ,with red paint still on it, makes it look weird across the rear edge but tunnel is perfect, uncut shape.. Attached Images __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 12-05-2005 at 10:01 PM.

12-05-2005, 07:54 PM	#16
chevy lover HMMMM Chevy Join Date: Aug 2002 Location: Quakertown, Pa Posts: 203	Re: WANTED: Cab in Pa/NJ area Crossy, I sent you a pm __________________ 68 Chevy C10 swb(under construction) 82 GMC K1500 6.2l diesel (daily driver) 77 Chevy K30 frame (only thing left is axles and trans/transfer)______________________________ Mike



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.